VDO 360-081-062-003C - Pressure Sender 0-10 Bar - M14

Article VDO.360081062003C

1-2 weeks delivery time
Price incl. 19% VAT

ASK FOR QUOTE

Our managers will contact you and clarify the terms of the order

The VDO 360-081-062-003C pressure sender has a measuring range of 0 - 10 Bar and can handle maximum pressure of 30 Bar for 2 seconds. It is suitable for use with oil, fuel, and air and has an operating voltage of 6 - 24 V DC. The warning contact is set at 5.50 Bar and has a maximum switching capacity of 5 Watt.

Description
Ask a Question

VDO 360-081-062-003C - Pressure Sender 0-10 Bar - M14

The pressure measuring range is 0 - 10 Bar, 0 - 145 PSI, and 0 - 1000 KPa. The maximum pressure is 30 Bar for 2 seconds. The thread is M14 x 1.5 with a length of 20.5 mm for the thread and nut (L1) and 12 mm for the thread length (L2). The torque is 60 Nm and the operating temperature is -25 °C to +100 °C.

This pressure sender is suitable for use with oil, fuel, and air as the pressure medium. The electrical features include an operating voltage of 6 - 24 V DC, a resistor range of 10 - 184 Ohm, and a single-pole common ground pressure sensor signal.

The warning contact is set at 5.50 Bar ± 0.30 Bar with a maximum switching capacity of 5 Watt non-inductive. It will close with falling pressure. The pressure sender connector is a Bosch push-on connector with a size of 2.8x0.8mm, while the warning contact connector is also a Bosch push-on connector with the same size.

Ask a Question

Question *

Name *

Contact number

E-mail *

I agree to the processing of personal data