1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Select from 4 methods to manage your batteries: Timer Disconnect, Low Voltage Disconnect, Automatic Charging Relay, or Solenoid. Each method offers unique features such as timed disconnection, low voltage sensing, automatic battery bank combining, and instant relay control. The Philippi 700107615 - Automatic Timer Disconnect ATD BS 7615 operates at 12V DC and has a continuous rating of 120A, making it a reliable choice for battery management.
- Description
- Ask a Question
-
Philippi 700107615 - Automatic Timer Disconnect ATD BS 7615
Select from 4 methods to manage your batteries:
- Timer Disconnect: A 12V signal triggers a relay to connect battery power to devices. The timer will disconnect devices after a preset time ranging from 15 minutes to 4 hours. Optional charge sense can be used instead of the 12V signal to reduce wiring. Test mode disconnects devices after 5 seconds to confirm relay and timer are operational.
- Low Voltage Disconnect: It senses low battery voltage and automatically disconnects devices to save power. The voltage setting is adjustable at 11.0V, 11.5V, or 12.0V. The low voltage setting can be used in conjunction with the timer disconnect, and devices will be disconnected prior to the preset time to preserve battery power.
- Automatic Charging Relay: It automatically combines two battery banks for charging off a single charging source, such as an alternator. It isolates batteries when the charging source is not present or discharging. The single side sensing design only monitors the voltage of the start battery. It is ideal for auxiliary batteries that are AGM or larger than the start battery.
- Solenoid: A 12V signal will connect or disconnect the relay without any time delay.
Nominal Voltage: 12V DC
Input Voltage Range: 9.5–16V
Continuous Rating: 120A
Intermittent Rating: 5 min. 210A
Amperage Operating Current (Combine): 175mA
Amperage Operating Current (Open): 4mA
Cable Size (to meet current ratings): 1 AWG (50mm²)
Maximum Cable Size: 1/0 AWG (50mm²)
Terminal Stud Size: 3/8″-16 (M10)
Terminal Stud Torque: 140 in-lb (15.82Nm)
Time Range: 15 Minutes – 4 Hours
-
Ask a Question
Popular products