|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 702193545 is a non-contact level measurement device that uses ultrasonic technology to accurately measure liquid levels in tanks. It eliminates the need for mobile parts, making it ideal for measuring levels in waste water tanks. The device operates on an input voltage of 10-30 V and has a consumption of 50 mA. It provides an output signal ranging from 0.5 V to 2.5 V, with a switch-on time of 5 s and an averaging time of 50 s. It can withstand temperatures ranging from -40°C to +85°C.
|
€ 128,47
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 702193550 is a non-contact level measurement device that uses ultrasonic technology to measure the liquid level in tanks. It eliminates the need for mobile parts, making it ideal for measuring levels in waste water tanks. The device operates on an input voltage of 10-30 V, consumes 50 mA, and provides an output signal of 0.5-2.5 V. It has a switch-on time of 5 s, an averaging time of 50 s, and can operate within a temperature range of -40°C to +85°C.
|
€ 128,47
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 702193560 is a non-contact level measurement device that uses ultrasonic technology to accurately measure liquid levels in tanks. With no mobile parts to get dirty or damaged, it is ideal for measuring levels in waste water tanks. It operates on an input voltage of 10-30V, consumes 50mA, and provides an output signal of 0.5V-2.5V. The switch-on time is 5 seconds and the averaging time is 50 seconds. It can withstand temperatures ranging from -40°C to +85°C.
|
€ 128,47
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 702193570 Non Contact Level Measurement UTV 70 uses ultrasonic technology to measure liquid levels in tanks without mobile parts. It is ideal for measuring levels in waste water tanks. The device operates at an input voltage of 10 – 30 V, with a consumption of 50 mA and an output signal range of 0.5 V – 2.5 V. It has a switch-on time of 5 seconds and an averaging time of 50 seconds. It can withstand temperatures from -40°C to +85°C.
|
€ 128,47
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Meet the Philippi 702193580 - UTV 80, an ultrasonic tank transmitter designed to elevate tank level measurements for both analog and digital instruments, specifically crafted for gray water and sewage tanks. Redefining the measurement process, this technology operates without any moving parts within the tank, ensuring resistance to dirt accumulation and potential damage—a particularly advantageous feature for holding tanks. It's important to note that, due to limitations during inclined positions or sailing with waves, the UTV 80 is not recommended for fuel tanks. However, signal improvement while driving can be achieved by installing a UFT sound guide tube. With seamless compatibility for existing conventional tank sensors following the SAE standard, a versatile supply of 10 - 30 V, and minimal current consumption of 50 mA, the UTV 80 operates reliably in a temperature range from -40°C to 85°C, guaranteeing consistent performance across diverse conditions.
|
€ 128,47
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi 702199025 Spacer Ring, designed for use with the Immersion Tube Sensor 25 mm UTS 25. This spacer ring ensures seamless integration and enhanced stability, guaranteeing precise temperature readings for your industrial applications.
|
€ 31,72
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi 702199400 - Sound Guide Tube for Ultrasonic Transmitter (UFT 40 / UFT 80), a crucial accessory for ultrasonic tank sensors UTV, UTN, and UTR, especially when measurements are required in inclined positions or when the sensor cannot be installed parallel to the liquid surface. This optional sound guide tube, with lengths of 400 or 800 mm (adjustable as desired), accommodates retrofitting with existing ultrasonic tank sensors, offering versatility in various setups. Featuring 5 holes according to the SAE standard and a minimum bore diameter of 41 mm, the UFT sound guide tube ensures precision and compatibility, enhancing the flexibility of ultrasonic tank measurements.
|
€ 26,98
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Enhance your measurement accuracy while your boat is in motion with the Philippi 702199800 Sound Guide Tube for Ultrasonic Transmitter UFT. This innovative tube protects the sensor from dirt and stains, improves measurement in frothy conditions, and provides acoustic decoupling for metal tanks. Customize the tube to your desired length and enjoy a secure installation with the included gasket.
|
€ 32,89
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 703000600 - S4B Bilge is a high-quality bilge pump designed for efficient water removal in boats. Its powerful motor and durable construction ensure optimal performance and reliability. With user-friendly features and corrosion-resistant materials, this bilge pump is suitable for various boat sizes and types. Keep your boat dry and safe with the Philippi 703000600 - S4B Bilge.
|
€ 196,59
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 703000640 - S4B Temperature is a cutting-edge device designed to accurately measure and monitor temperature levels. With its advanced technology and sleek design, this temperature sensor is the perfect solution for various applications.
|
€ 275,79
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 703000650 - Sense4Boat Battery Sensor is a cutting-edge device designed specifically for boating enthusiasts. It offers advanced monitoring capabilities for your boat's battery, ensuring you have complete control and peace of mind while out on the water. With real-time data and seamless connectivity, this compact sensor is a must-have for maintaining the health and efficiency of your boat's battery.
|
€ 196,59
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Meet the Philippi 71000020 - CBN NMEA2000 to P-BUS Converter (Philippi CBN), your essential solution for seamlessly displaying battery, tank, and P-BUS data from the PSM monitor on chart plotters and NMEA2000® compatible devices. This converter acts as a vital NMEA2000® bridge, efficiently translating data and supporting key Parameter Group Numbers (PGNs) such as Switch Bank Status, Fluid Level, DC Status, Battery Status, AC Power Phase A, AC Voltage Phase A, and Converter Status. Enhance your monitoring capabilities by integrating this converter, but do check the compatibility of supported PGNs with your plotter, as it may vary depending on the manufacturer and software version.
|
€ 295,59
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 71000030 - Interface CMB is a necessary device for displaying data and adjusting settings of the Mastervolt combination inverter and lithium batteries on the PSM. It operates through the Masterbus network and has compact dimensions of H 66 x W 78 x D 32 mm.
|
€ 536,02
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT This interface allows access to the data of voltage, current charge or discharge current and the state of charge of the SuperB Nomia and Nomada lithium batteries via the P-BUS for displaying the data on the system monitors PSL and PSM 2. If several batteries are combined into a block, data of the individual batteries can be queried in addition to the overall data. This makes the voltages of individual cells and other important data for battery analysis available. The interface eliminates the need to install a shunt, and it is powered via the CANopen® network. Dimensions: L 107 x W 85 x H 40 mm.
|
€ 394,59
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 71000042 - P-bus - Can Interface CBO-EPT is a high-performance device that enables seamless communication between different components within your electrical system. With its advanced P-bus and CAN interface, this interface ensures reliable and efficient data transfer, enhancing the overall performance and functionality.
|
€ 352,16
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 71000104 - Temperature Interface TPC 4 P-BUS is a versatile temperature monitoring solution that allows for the connection of up to four temperature sensors. It offers individual limit value settings for each sensor, generating alarm messages when the values are exceeded or undershot. With its plug-in screw terminals and included M12-T cable, installation is quick and easy. The TPC 4 operates on a supply voltage of DC 8-32 V and has a low current consumption of 8 mA. Its compact dimensions of L 107 x W 85 x H 40 mm make it suitable for various applications.
|
€ 261,63
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 71000230 - AC-Interface CAV is an AC interface in a DIN rail housing designed for measuring the AC phase of 230V/50Hz. It collects and displays data from various devices to visualize the energy flow of the electrical AC system. The AC-Interface CAV detects current and voltage of 230V AC devices and provides information such as AC on-board voltage, AC on-board network current, consumed kilowatt hours, and the name of the source/consumer for clear identification. It can be connected to the P-BUS via an M12-T cable and has a current measuring range of 16A to 100A.
|
€ 261,63
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Philippi 71000232 - Relay Module CMR 232 serves for fused switching of two-pole systems with 2 consumers, with a maximum power capacity of 30A.
|
€ 417,22
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 71000306 Digital Shunt 300A SHX 300-L, identified as Type Philippi SHL 312, is an active measurement shunt designed for direct connection to the PBUS. It excels in precisely recording currents from individual consumers or various charging sources such as solar cells, wind generators, alternators, or hydrogenerators. The SHL 312 facilitates the display of energy distribution on the DC energy monitor of the PSM. Featuring an M12 connection cable for seamless integration with the PBUS, it boasts a current carrying capacity of 300 A (600 A for 1 min, 1500 A for 0.5 s) and supports nominal voltages of 12 V, 24 V, 36 V, and 48 V. With a current consumption of 6 mA (stand-by 2 mA @ 12V) and an operating voltage range of 8 - 60 V, it provides a measuring range spanning from 10 mA to 1500 A. Compact in size, with dimensions of L 118 x B 40 x H 52mm, this digital shunt offers precise and efficient current monitoring for a range of applications.
|
€ 205,08
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Digital battery management shunt for precise recording of current, voltage, and capacity. Galvanically isolated P-BUS allows recording of battery data from isolated battery groups. SHX calculates battery capacity based on current and voltage values. Power supplied via voltage measuring lead. Current carrying capacity of 300A, with dimensions of L 118 x W 40 x H 65 mm.
|
€ 205,08
-
+
| ||