|
1-2 weeks delivery time Price incl. 19% VAT Upgrade your STV 700 Series switches with Philippi's 122228xxx Enhanced Rocker Arms, meticulously designed for smooth operation and durability.
|
€ 3,66
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi 702199400 - Sound Guide Tube for Ultrasonic Transmitter (UFT 40 / UFT 80), a crucial accessory for ultrasonic tank sensors UTV, UTN, and UTR, especially when measurements are required in inclined positions or when the sensor cannot be installed parallel to the liquid surface. This optional sound guide tube, with lengths of 400 or 800 mm (adjustable as desired), accommodates retrofitting with existing ultrasonic tank sensors, offering versatility in various setups. Featuring 5 holes according to the SAE standard and a minimum bore diameter of 41 mm, the UFT sound guide tube ensures precision and compatibility, enhancing the flexibility of ultrasonic tank measurements.
|
€ 24,29
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Meet the Philippi 71000020 - CBN NMEA2000 to P-BUS Converter (Philippi CBN), your essential solution for seamlessly displaying battery, tank, and P-BUS data from the PSM monitor on chart plotters and NMEA2000® compatible devices. This converter acts as a vital NMEA2000® bridge, efficiently translating data and supporting key Parameter Group Numbers (PGNs) such as Switch Bank Status, Fluid Level, DC Status, Battery Status, AC Power Phase A, AC Voltage Phase A, and Converter Status. Enhance your monitoring capabilities by integrating this converter, but do check the compatibility of supported PGNs with your plotter, as it may vary depending on the manufacturer and software version.
|
€ 278,20
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi 125700006 - ETA Circuit Breaker 6A 2-5700-K10-DD, a single-pole thermal overcurrent circuit breaker with push-push actuation for on-off switching. Featuring a two-color switching status display, it offers easy one-hole mounting, operates in both DC 28 V and AC 250 V, and accommodates a rated current range from 6 to 25 A with screw connection. With a width of 14.5 mm, it's compact and versatile, with potential splash protection for added durability.
|
€ 29,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 71000306 Digital Shunt 300A SHX 300-L, identified as Type Philippi SHL 312, is an active measurement shunt designed for direct connection to the PBUS. It excels in precisely recording currents from individual consumers or various charging sources such as solar cells, wind generators, alternators, or hydrogenerators. The SHL 312 facilitates the display of energy distribution on the DC energy monitor of the PSM. Featuring an M12 connection cable for seamless integration with the PBUS, it boasts a current carrying capacity of 300 A (600 A for 1 min, 1500 A for 0.5 s) and supports nominal voltages of 12 V, 24 V, 36 V, and 48 V. With a current consumption of 6 mA (stand-by 2 mA @ 12V) and an operating voltage range of 8 - 60 V, it provides a measuring range spanning from 10 mA to 1500 A. Compact in size, with dimensions of L 118 x B 40 x H 52mm, this digital shunt offers precise and efficient current monitoring for a range of applications.
|
€ 193,02
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 125700008 ETA Circuit Breaker is a compact and versatile single-pole thermal overcurrent circuit breaker, featuring push-push actuation for seamless on-off switching. With a two-color switching status display and easy one-hole mounting, it offers reliable operation with a wide voltage range (DC 28 V, AC 250 V) and a rated current range of 6 to 25 A. Its screw connection ensures secure electrical connections, while its slim 14.5 mm width and splash protection make it suitable for diverse applications.
|
€ 29,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi 71004012 - VTM2 12/24V Tank Monitor, a compact and versatile solution tailored for yachts and vehicles with up to 4 tanks. Uniquely, it allows simultaneous monitoring of two battery groups, providing a clear overview of tank levels and battery voltages through its 3.5" TFT touch screen—eliminating the need for button operation. With a built-in brightness sensor, the screen intelligently adjusts to dim in the dark, conserving valuable energy. Compatible with various Philippi tank sensors (TGT/TGW, UTV, TDS/TDN) and even sensors from other manufacturers, it supports signals like 10-180°, 240-330°, 0-10 V, or 4-20 mA. Each tank is configurable individually, accommodating non-linear tank geometries, and allowing custom alarm thresholds for comprehensive monitoring. This monitor is equipped with practical features such as a relay output with configurable functions, making it a reliable and efficient choice for your tank monitoring needs.
|
€ 276,20
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Philippi 125700010 - ETA Circuit Breaker 10A 2-5700-K10-DD is a single-pole thermal overcurrent circuit breaker with push-push actuation for on-off switching. It features a two-color switching status display, one-hole mounting Ø 10 mm, compatibility with DC 28 V and AC 250 V, a rated current range of 6 to 25 A, screw connection, compact 14.5 mm width, and the possibility of splash protection.
|
€ 29,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Meet the Philippi BTM 2 Battery and Tank Monitor (71004050) – an advanced system providing precise insights into your battery and tank status. Featuring a 3.5" color TFT touchscreen with automatic brightness adjustment and an integrated NMEA 2000 interface, this monitor ensures an intuitive experience and seamless integration with your network. From battery monitoring, solar yield measurement, and tank measurement to an ACE charger interface for charging process monitoring, the BTM 2 offers comprehensive capabilities. With an operational voltage of 8-64 V and low standby consumption, it's an efficient solution for energy management and deep discharge protection. Upgrade your onboard monitoring with the Philippi BTM 2.
|
€ 309,48
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Discover the Philippi 125700012 - ETA Circuit Breaker 12A 2-5700-K10-DD: a single-pole thermal overcurrent circuit breaker with push-push actuation for easy on-off switching. Featuring a two-color switching status display, it mounts effortlessly with a Ø 10 mm hole and operates at DC 28 V and AC 250 V, with a rated current range of 6 to 25 A. With screw connection and a compact width of 14.5 mm, it offers efficient and versatile protection, with optional splash protection for added durability.
|
€ 29,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi BLM Set (71004210), a comprehensive solution providing a clear overview of your battery system's crucial details. Monitor consumer and starter batteries effortlessly with the included shunt SHE 300, and optionally track a third battery group's voltage. Seamlessly integrate this system into your plotter via the NMEA 2000/Seatalk NG interface. The BLM Set goes beyond basic monitoring, offering insights into solar system output and energy yield through the additional shunt SHP 300. With features like charging current and mains voltage display for ACE battery chargers, coupled with effective protection against deep discharge via the FBR 265 remote-controlled main battery switch, this set ensures robust and intelligent energy management. Operating at a voltage range of 8-64 V and boasting a sleek design with dimensions of L 105 x W 105 x H 35 mm, it's an essential tool for powering your marine adventures.
|
€ 353,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Single-pole thermal overcurrent circuit breaker with push-push actuation for on-off switching, featuring a two-color status display. Suitable for mounting with a Ø 10 mm aperture, it supports DC 28 V and AC 250 V, with a rated current range of 6 to 25 A. Installed using screw connection, the device measures 14.5 mm in width and is splashproof.
|
€ 29,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Meet the Philippi 756211201 - Alternator Series 621 120A, featuring the type Philippi 4130-G211-K4M1. This alternator is a reliable power solution with a single-pole thermal circuit breaker and a trip-free release, ensuring unparalleled safety that cannot be influenced. Designed for effortless installation with its one-hole mounting of Ø 12 mm, it maintains a sleek device width of 18 mm. Operating at DC 28 V, this alternator covers a rated current range from 30 to 70 A, making it a compact and efficient choice for a variety of applications where robust power generation is essential.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 770008011 DDK 06 Deck Bushing, identified as Type Philippi DDK, is a resilient plastic deck duct engineered for corrosion and saltwater resistance. With the assurance of an absolute seal provided by O-rings, this deck bushing ensures reliable protection for your installations. Featuring a 49 mm flange diameter, it offers a secure and efficient solution for passages on your deck within the 6-11mm range. Ideal for marine applications, this deck bushing combines durability and effective sealing to withstand the challenges of harsh environments, providing a dependable component for your vessel's infrastructure.
|
€ 13,20
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Single-pole thermal overcurrent circuit breaker with push-push actuation for on-off switching, featuring a two-color switching status display. Designed for easy one-hole mounting, accommodating a rated current range of 6 to 25 A for both DC (up to 28 V) and AC (up to 250 V) systems. Screw connection ensures secure installation, while the device's narrow 14.5 mm width allows for compact integration. Splash protection measures are also possible for added durability.
|
€ 29,85
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 80001240 TSD 12/40, belonging to the Philippi TSD 40 series, introduces a two-stage deep discharge protection system to optimize battery longevity. This remote-controllable battery cut-off switch ensures comprehensive battery protection by selectively disconnecting connected consumers during deep discharge, allowing crucial or safety-relevant devices to remain operational. An acoustic alarm signals imminent shutdown, automatically reactivating at 12.5/25V. The unit's versatile "13 V" setting enables energy management, activating additional appliances like a cool box or heating carpet when the alternator is running or solar panels generate sufficient energy. Adjustable between 12/24 V DC via a DIP switch, each channel boasts a maximum switching capacity of 40 A, with precise switch-off and restart voltages. Remote control capabilities are facilitated through the FB-TSA control panel, and the unit's compact dimensions (L 130 x W 80 x H 42 mm) and screw terminals for connections (max. 10 mm2) enhance its practicality for various applications.
|
€ 108,70
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 130879001 - 3131-MRS Side Module Mounting Frame is a stackable frame designed for easy installation of waterproof circuit breakers from the ETA 3131 series. With a snap-in range of 3.2 to 9.5 mm, this side module mounting frame securely holds the individual modules together, ensuring a permanent connection. The minimum installation opening for two side modules is W 51.2 x H 48.3 mm, and the overall dimensions of the frame are W 35 x H 68 mm.
|
€ 5,21
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 80001500 UTI Interface, categorized under Philippi UTI, serves as a crucial link between tank sensors (TDS, TDW, TDT) and analog round instruments with voltage or resistance input. This interface adeptly transforms the 4 - 20 mA signal from tank sensors into a selectable voltage range of 0.5 - 2.5 V or a resistance signal spanning 10 - 180 ?. Its compatibility extends to various tank sensor systems, including fuel sensors with resistance signals of 10 – 180 ? or 240 - 33 ?, fuel gauges with voltage output (0 - 10 V), and fuel gauges with a current signal (4 - 20 mA). Beyond tank sensors, the UTI Interface seamlessly connects to measuring instruments with resistance inputs (10 - 180 ? or 240 – 33 ?) and voltage inputs, ensuring versatile integration into diverse monitoring and measurement setups.
|
€ 94,28
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT The Philippi 130879101 - 3131-MRM Mounting Frame Middle Module is a stackable mounting frame suitable for easy installation of waterproof circuit breakers. It securely snaps together with other modules and extends the overall frame width. With dimensions of W 26.2 x H 68 mm, it offers a compact and efficient solution.
|
€ 5,21
-
+
| ||
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Philippi 80004975 - ACE-LIN, a vital interface empowering ACE chargers to seamlessly communicate with BTM and BLS monitors. This user-friendly interface is effortlessly put into operation by clipping it into the prepared holder in the ACE charger and connecting the provided cable. Notably, the ACE-LIN interface is exclusively required for ACE 12/25, ACE 12/40, and ACE 24/20 models, while all other models come equipped with a built-in interface. Streamline your charging and monitoring experience with this compact and essential communication bridge.
|
€ 69,22
-
+
| ||