Humminbird Fish Finders are digital sonar and GPS systems designed for boats, ice, and portable use, helping anglers find fish, read depth, and navigate with precision. Using technologies such as CHIRP, side imaging, live sonar, and built-in GPS mapping, they break down the water like never before, delivering clear target separation, detailed imaging, and a fast, intuitive user interface for efficient time on the water.
|
1-2 weeks delivery time The Humminbird 710297-1 Transom Transducer XNT 9 HW MSI 150 T offers MEGA Down Imaging, Side Imaging, and Dual Spectrum CHIRP 2D sonar for high-definition underwater views, with a built-in temperature sensor and a 20-foot cable. It's compatible with HELIX 7 CHIRP MEGA SI GPS G3/G3N and G4/G4N models, with sonar frequencies reaching up to 1,200 ft in depth and Side Imaging ranges of up to 800 ft.
|
$ 474.83
-
+
| ||
|
1-2 weeks delivery time The Humminbird 710306-1 Transom Transducer XNT 9 HW SI T provides CHIRP Side Imaging and Down Imaging along with Dual Spectrum CHIRP 2D sonar. It includes a temperature sensor, has a 20-foot cable, and is compatible with HELIX 7 CHIRP SI GPS G4 models, but it is not designed for use with MEGA Side Imaging systems.
|
$ 460.40
-
+
| ||
|
1-2 weeks delivery time The Humminbird 710274-1 Transom Transducer XNT 9 HW T is a 2D sonar-only model designed for a wide range of HELIX and ICE HELIX units, including models from HELIX 5 through HELIX 12. It supports CHIRP frequencies from 140 to 240 kHz, has a 6-meter cable, and can reach sonar depths up to 365 meters.
|
$ 215.05
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720108-1 Transducer Adapter Cable 14 M360 2DDI Y allows users to connect both a MEGA 360 Imaging transducer and a 2D/MDI transducer to compatible Humminbird units such as SOLIX, APEX, and select HELIX models with an additional adapter. It features waterproof connectors and varying cable lengths for each connection.
|
$ 137.03
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720107-1 Transducer Adapter Cable 9 M360 2DDI Y is a Y-cable designed for HELIX G3N and G4N models in the 8 to 15 series, enabling simultaneous connection of MEGA 360 Imaging and an external 2D/MDI transducer. It has a short cable length of 30.5 cm for clean installation.
|
$ 112.51
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720083-1 Transducer Adapter Cable AS 14SIDBY is intended for use with Solix/Onix units that do not require MEGA imaging. It provides a 75 cm connection length and ensures signal reliability for compatible systems with standard Side Imaging requirements.
|
$ 109.70
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720056-1 Transducer Adapter Cable AS SILR Y allows the connection of two transducers to a single HELIX unit without MEGA Side Imaging. It supports side imaging and dual beam functions, includes a 75 cm cable, and simplifies system setups without a switch.
|
$ 75.07
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720081-1 Transducer Extension Cable EC 14W10 is a 3-meter cable tailored for Solix and Onix models without MEGA imaging. Featuring a 14-pin connector, it ensures extended and secure connections for non-MEGA sonar systems.
|
$ 142.87
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720096-1 Transducer Extension Cable EC M10 supports HELIX models and most Humminbird fish finders post-2001, excluding APEX, SOLIX, ONIX, and ION. It uses a 7-pin connector and extends transducer reach by 3 meters, though it’s not compatible with MEGA 360 systems.
|
$ 98.07
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720106-1 Transducer Extension Cable EC M3 14W10 is a 3-meter cable for APEX, SOLIX, and XPLORE models. It supports 14-pin transducers, MEGA 360 Imaging, and built-in MEGA Imaging from Minn Kota trolling motors, offering wide sonar compatibility with adapter options.
|
$ 157.31
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720106-2 Transducer Extension Cable EC M3 14W30 provides a 9-meter (30-foot) length for extended reach, compatible with 14-pin transducers for APEX, SOLIX, ONIX models, and built-in MEGA Imaging transducers on Minn Kota trolling motors, supporting various Minn Kota and HELIX systems.
|
$ 171.74
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720096-2 Transducer Extension Cable EC M30 is designed for HELIX series and most Humminbird fish finders made after 2001, excluding APEX, SOLIX, ONIX, and ION models, with a 3-meter (9-foot) length and a 7-pin connector.
|
$ 134.14
-
+
| ||
|
Humminbird 710302-1 - SSTH 14 HW MSI+ T - Solix Mega SI+, DI+, DS CHIRP w/ Temp Thru-Hull Transducer
1-2 weeks delivery time The Humminbird 710302-1 SSTH 14 HW MSI+ T is a stainless steel thru-hull transducer built for larger boats, supporting MEGA Side Imaging+, Down Imaging+, Dual Spectrum CHIRP sonar, and a built-in temperature sensor, compatible with XPLORE, APEX, SOLIX G2 and G3 models.
|
$ 1,773.72
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720103-1 Transducer Split Cable 14 M SIDB Y 75 cm enables separation of Side Imaging and DualBeam signals, allowing installation of a separate DualBeam transducer without a switch, designed for APEX and SOLIX units.
|
$ 128.46
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720101-1 Transducer Split Cable 9 M SIDB Y 75 cm supports simultaneous use of Side Imaging and Dual Beam transducers on a single unit without a switch, compatible with HELIX units and supporting MEGA Side Imaging technology.
|
$ 92.30
-
+
| ||
|
1-2 weeks delivery time The Humminbird 720102-1 Transducer Split Cable 9 M SILR Y 75 cm separates Side Imaging into left and right beams, allowing two side imaging transducers on one unit without a switch, ideal for deep V hull boats or obstructions, and compatible with most Side Imaging products except SOLIX or ONIX.
|
$ 92.30
-
+
| ||
|
1-2 weeks delivery time The Humminbird 710268-1 XM 14 74 MSI T is a transom mount transducer featuring MEGA SI+, MEGA DI+, and DualBeam PLUS technologies with multiple frequency options and a built-in temperature sensor, compatible with XPLORE, APEX, SOLIX G3, and early SOLIX CHIRP MEGA SI+ models.
|
$ 873.15
-
+
| ||
|
1-2 weeks delivery time The Humminbird 740011-1 Transom Mount Hardware MHX HS kit provides durable plastic and stainless steel mounting hardware for XHS model transducers, compatible with various Humminbird units including XHS 9 HDSI 180 T and HELIX series models.
|
$ 62.01
-
+
| ||
|
1-2 weeks delivery time The Humminbird 740093-1 Transom Mount Hardware MHX XNT kit is made from durable plastic and designed for XNT transom-mount transducers, including a kick-up bracket and transducer bracket plug for secure installation.
|
$ 80.75
-
+
| ||
|
1-2 weeks delivery time The Humminbird 710247-1 Transom Mount Transducer XNT 14 20 T features DualBeam technology with 20 and 60-degree beams, built-in temperature sensor, compatible with XPLORE, APEX, SOLIX, and ONIX units, and supports 2D sonar only.
|
$ 215.05
-
+
| ||
How does sonar technology in Humminbird Fish Finders help anglers clearly understand depth and underwater structure?
Sonar technology in Humminbird Fish Finders uses ground-breaking solutions such as CHIRP digital sonar and side imaging sonar to deliver best-in-class imaging with exceptional clarity and color on an easy-to-read screen. These depth finders give anglers clear forward and downward viewing of structure and fish, supported by a lightning-fast user interface, GPS navigation capabilities, and options like card slot access, helping spot targets faster and spend less time searching and more time fishing.
What functional differences exist between various series of these depth finders?
Functional differences between various series of these depth finders relate to the level of available features, processing power, screen size, and clarity of sonar output. Advanced series offer industry-leading performance with the clearest sonar, ground-breaking imaging technology, faster response, and broader network integration, while more basic options focus on easy operation and essential depth-finding functions to suit different needs across the market.
How does side imaging improve awareness of structure around the boat?
Side imaging improves awareness of structure around the boat by scanning wide areas to both sides, revealing contours, objects, and fish-holding zones that are not visible directly beneath the hull. Using ground-breaking technology such as mega-level imaging, fish finders give anglers a clear, expanded view of the underwater environment like never before, supporting faster interpretation and more effective navigation within a one-boat network.