Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT Trimat GBC is a semi-flexible asbestos-free brake lining made of durable woven material, both natural and artificial, with the inclusion of brass wire. The most efficient general-purpose brake lining suitable for most industrial applications. Coefficient of friction (dynamic) 0.48. Nominal speed 11.0 mm3. Specific gravity 1.24. The size of the rivet insert is 102.0 N/mm ² (14,790 psi). Tensile strength 34.0 N/mm ² (4930 psi). Maximum shear strength 27.7 N/mm ² (4017 psi). Ultimate compressive strength 137.0 N/mm ² (19865 psi). Maximum intermittent temperature 230 ° C (450 ° F). Maximum constant temperature 150 ° C (300 ° F). Pressure 0.07-2.0 N/mm ² (10-290 psi). Maximum compression speed 25 m/s (5000 ft/min). Nominal roll length: 10 meters (33 feet). Thickness: 5.0 mm (3/16 ") to 32 mm (1¼"). Width: up to 530 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MR8728 is a fully cured, flexible, non-asbestos, non-metallic friction material mixed with synthetic rubber. Suitable for industrial applications where an average coefficient of friction is required. Coefficient of friction (dynamic) 0.46. Nominal speed 47 mm3. Specific gravity 2.10. Ultimate tensile strength 5 N/mm ² (750 psi). Maximum shear strength 18 N/mm ² (2610 psi). Maximum compression strength 60 N/mm ² (8700 psi). Maximum intermittent temperature 350 ° C (660 ° F). Maximum continuous temperature 250 ° C (480 ° F). Maximum pressure 2.0 N/mm ² (290 psi). Maximum compression speed 25 m/s (5000 ft/min). The nominal length of the roll is 7.5 meters (25 feet) thick up to 8 mm (5/16 "). 5 meters (16.4 feet) thick over 8 mm (5/16 "). Thickness 3 mm (⅛ ") to 12.5 mm (½"). Width up to 200 mm (8 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat CNB is one asbestos-free material suitable for low and medium operating temperatures, made from cotton fabric impregnated with special resins to make a brake lining that combines strength and flexibility together with a high coefficient of friction. The coefficient of friction is 0.60. Nominal speed 22.0 mm3. Specific gravity 1.08. Gripping holding capacity 73.8 N/mm ² (10,700 psi). Maximum tensile strength 28.1 N/mm ² (4075 psi). Maximum shear strength 12.7 N/mm ² (1842 psi). Ultimate compressive strength 42.2 N/mm ² (6120 psi). Maximum intermittent temperature 130 ° C (270 ° F). Maximum constant temperature 90 ° C (194 ° F). Nominal roll length: 10 meters (33 feet). Thickness: 3.0 mm (1/8 ") to 25 mm (1"). Width: up to 510 mm (20 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MR2220 is a flexible, asbestos-free, friction material to achieve optimal performance in applications where a high level of friction is required and characterized by high stability, a very stable coefficient of friction at higher temperatures. Coefficient of friction (SAE J661) 0.53. Wear frequency (SAE J661) 63 mm3. Specific gravity 2.50. Maximum tensile strength 23 N/mm ² (3335 psi). Maximum compression strength 88 N/mm ² (12,760 psi). Maximum intermittent temperature 350 ° C (662 ° F). Maximum continuous temperature 250 ° C (482 ° F). Maximum pressure * 3.0 N/mm ² (290 psi). Maximum compression speed 30 m/s (5000 ft/min). The maximum length is 5 meters. Thickness 3 mm (0.125 in) to 10 mm (0.375 in). Width up to 200 mm (8 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT MR2215 was developed for automotive brake linings, industrial brakes, cranes and excavators. It is a flexible molded product with a non-asbestos fiber base. Coefficient of friction (dynamic) 0.42. Wear frequency 22 mm. Specific gravity 2.00. Ultimate tensile strength (curing) 15 N/mm ² (2175 psi). Maximum shear strength (curing) 15 N/mm ² (2175 psi). Ultimate compressive strength (curing) 75 N/mm ² (10875 psi). Maximum intermittent temperature 325 ° C (617 ° F). Maximum constant temperature 250 ° C (482 ° F). Recommended operating pressure is 0.07 - 1.5 N/mm ² (10 - 218 psi). Maximum compression speed 25 m/s (5000 ft/min). Thickness 3 mm (⅛ ") to 12.5 mm (½"). Width up to 200 mm (8 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MR7032 is a flexible, non-asbestos, friction material mixed with synthetic rubber and resin without metal ingredients. Great for industrial brakes and high friction clutches. Coefficient of friction (dynamic) 0.41. Specific gravity 1.90. Ultimate tensile strength 7 N/mm ² (1015 psi). Maximum shear strength 24 N/mm ² (3480 psi). Maximum compressive strength 84 N/mm ² (12180 psi). Maximum intermittent temperature 300 ° C (572 ° F). Maximum continuous temperature 250 ° C (482 ° F). Maximum pressure * 2.0 N/mm ² (290 psi). Maximum compression speed 25 m/s (5000 ft/min). The nominal length of the roll is 7.5 meters (25 feet) thick up to 8 mm (5/16 "). Thickness 3 mm (⅛ ") to 12 mm (½"). Width up to 200 mm (8 ")
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MN2221 is a rigid friction material mixed with metal ingredients, special resin and synthetic rubber. It has a high level of friction and is highly stable. Coefficient of friction (SAE J661) 0.53. Wear frequency (SAE J661) 63 mm3. Specific gravity 2.50. Maximum tensile strength 23 N/mm ² (3335 psi). Maximum compression strength 88 N/mm ² (12,760 psi). Maximum intermittent temperature 350 ° C (662 ° F). Maximum continuous temperature 250 ° C (482 ° F). Maximum pressure * 3.0 N/mm ² (290 psi). Maximum compression speed 30 m/s (5000 ft/min).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT MN185 is a rigid friction material having a non-asbestos base of glass and synthetic fibers during dispersion. Friction factor (dynamic) 0.52 (SAE J661). Wear frequency 36 mm3. Specific gravity 2.10. Tensile strength 32 N/mm ² (4640 psi). Maximum shear strength 24 N/mm ² (3480 psi). The ultimate compressive strength is 170 N/mm ² (24,650 psi). Maximum intermittent temperature 350 ° C (660 ° F). Maximum continuous temperature 300 ° C (570 ° F). Pressure 0.07-2.5 N/mm ² (10-363 psi). Maximum compression speed 60 m/s (11808 ft/min).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat TNC is a flexible asbestos brake lining made of durable fabric from synthetic threads. It is used for oil industrial couplings, drum brakes, belt pads. Coefficient of friction (dynamic in oil) 0.08. Wear rate (in oil) 4.0 mm3. Mass density 0.90 g/cm3. Maximum intermittent temperature * 400 ° C (750 ° F). Maximum continuous temperature * 300 ° C (570 ° C). Maximum pressure 2.5 N/mm ² (363 psi). Maximum compression speed 25 m/s (5000 ft/min). Nominal roll length: 10 meters (33 feet). Thickness: 2.0 mm (0.08 inch). Width: up to 105 mm (4 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT MN1050 is a rigid friction material with molding, having a non-asbestos base of glass and synthetic fibers during dispersion. This material has a medium/high friction level and exhibits a good coefficient of friction stability over a wide range of operating temperatures. Coefficient of friction (dynamic) 0.44. Wear frequency 42 mm3. Specific gravity 2.05. Ultimate tensile strength (curing) 16 N/mm ² (2320 psi). Ultimate bending strength (curing) 35 N/mm ² (5075 psi). Maximum intermittent temperature 400 ° C (750 ° F). Maximum continuous temperature 300 ° C (570 ° F). Pressure 0.07-2.0 N/mm ² (10-290 psi). Maximum compression speed 25 m/s (5000 ft/min).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Solid alloy friction material MN1081 having a non-asbestos base made of steel. This material has a medium/high level of friction and shows a good coefficient of friction stability, has a balanced range of properties. Friction factor (dynamic) 0.42 (average flow rate )/0.30 (heavy duty). Nominal speed 90 mm3. Specific gravity 3.00. Maximum shear strength (curing) 10.0 N/mm ² (1450 psi). Maximum compressive strength (hardened) 62.0 N/mm ² (8990 psi). Maximum discontinuity temperature 650 ° C (1200 ° F). Maximum continuous temperature 250 ° C (480 ° F). Pressure 0.40-5.2 N/mm ² (58-754 psi). Maximum flow speed 60 m/s (12,000 ft/min).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MN1042 is a rigid, completely informal, non-metallic material without asbestos based on dispersion. It has a low friction characteristic and was designed specifically for use in applications where smooth and silent operation is provided. This material provides excellent wear resistance, a very versatile material suitable for industrial clutch and braking applications. Coefficient of friction (dynamic) 0.15. Wear frequency 40 mm3/mJ (0.0066 in/hp). Specific gravity 1.90. Hardness (Rockwell R scale) 80. Maximum tensile strength 24.5 N/mm ² (2553 psi). Maximum shear strength 28.0 N/mm ² (4060 psi). Ultimate compressive strength (cured) 110.0 N/mm ² (15,950 psi). Maximum intermittent temperature 350 ° C (660 ° F). Maximum constant temperature 175 ° C (350 ° F). Maximum pressure 2.0 N/mm ² (290 psi). Maximum reduction speed is 25 m/s.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT MR2210 was developed for automotive brake linings, industrial brakes, cranes and excavators. This is a rigid molded product that has a non-asbestos fiber base in the dispersion. Coefficient of friction (dynamic) 0.42. Wear frequency 22 mm. Specific gravity 2.00. Ultimate tensile strength (curing) 15 N/mm ² (2175 psi). Maximum shear strength (curing) 15 N/mm ² (2175 psi). Ultimate compressive strength (curing) 75 N/mm ² (10875 psi). Maximum intermittent temperature 325 ° C (617 ° F). Maximum constant temperature 250 ° C (482 ° F). Recommended operating pressure is 0.07 - 1.5 N/mm ² (10 - 218 psi). Maximum compression speed 25 m/s (5000 ft/min). Nominal sheet lengths up to 1000 mm (40 inches). Thickness 2 mm (0.08 in) to 12.5 mm (0.5 in). Width up to 200 mm (8 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat CNC is an asbestos-free material suitable for low and medium operating temperatures, made of cotton fabric impregnated with special resins for the manufacture of a brake lining that combines strength and flexibility together with a high coefficient of friction. The material has good retention and is suitable for bonding. The coefficient of friction is 0.60. Specific gravity 1.06. Rivet volume 97.6 N/mm ² (14150 psi). Tensile strength 29.0 N/mm ² (4200 psi). Maximum shear strength 12.4 N/mm ² (1800 psi). Maximum compressive strength 93.1 N/mm ² (13500 psi). Maximum intermittent temperature 130 ° C (350 ° F). The maximum constant temperature is 100 ° C (212 ° F). Nominal roll length: 10 meters (33 feet). Thickness: 3.0 mm (1/8 ") to 25 mm (1"). Width: up to 510 mm (20 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT MN1070 is a solid shaped friction material having a non-asbestos base of steel threads, it has a medium/high friction level and demonstrates a good coefficient of friction stability over a wide range of operating temperatures. Coefficient of friction (dynamic) 0.46. Specific gravity 2.70. Tensile strength 22 N/mm ² (3190 psi). Maximum shear strength 15 N/mm ² (2175 psi). Maximum compressive strength 94 N/mm ² (13630 psi). Maximum discontinuity temperature 550 ° C (1020 ° F). Maximum continuous temperature 250 ° C (480 ° F). Pressure 0.4-5.2 N/mm ² (60-754 psi). Maximum compression speed 25 m/s (5000 ft/min).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MN1046 is a rigid all-metal asbestos-free material based on dispersion, has an average friction characteristic, a versatile material suitable for most applications for industrial couplings and braking that require an asbestos-free liner, including power presses for blacksmith and sheet metal, earthmoving equipment, machine tools, etc. Coefficient of friction (dynamic) 0.37. Nominal speed 50 mm3. Specific gravity 1.95. Hardness 82 R. Tensile strength 28.0 N/mm ² (4060 psi). Maximum shear strength 24.5 N/mm ² (3553 psi). Maximum compressive strength 150.0 N/mm ² (21,750 psi). Maximum intermittent temperature 400 ° C (750 ° F). Maximum continuous temperature 300 ° C (570 ° F). Pressure 0.07-2.0 N/mm ² (10-290 psi). Maximum compression speed 25 m/s (5000 ft/min)
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat MN1056 is a rigid friction material that has a non-asbestos base of glass and synthetic fibers, has an average level of friction and demonstrates a good coefficient of resistance to friction in a wide range of workers. Coefficient of friction (dynamic) 0.35. Nominal speed 24 mm3. Maximum tensile strength 20 N/mm ² (2900 psi). Maximum shear strength 16 N/mm ² (2320 psi). The ultimate compressive strength is 100 N/mm ² (14500 psi). Maximum intermittent temperature 350 ° C (660 ° F). Maximum continuous temperature 300 ° C (570 ° F). Pressure * 0.07-2.0 N/mm ² (10-290 psi). Maximum compression speed 25 m/s (5000 ft/min).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat GZC is an asbestos-free brake pad made of durable woven material with zinc wire. This material can be supplied for use in oil dips. The most efficient general-purpose brake lining suitable for use in most applications, including winches, cranes, earthmoving and agricultural machinery. Coefficient of friction (dynamic) 0.38. Specific gravity 1.24. The size of the rivet insert is 102.0 N/mm ² (14,790 psi). Maximum tensile strength 40.0 N/mm ² (5800 psi). Maximum shear strength 25.0 N/mm ² (3625 psi). Maximum compressive strength 148.0 N/mm ² (21460 psi). Maximum intermittent temperature 230 ° C (450 ° F). Maximum constant temperature 150 ° C (300 ° F). Pressure 0.07-2.0 N/mm ² (10-290 psi). Maximum compression speed 25 m/s (5000 ft/min). Nominal roll length: 10 meters (33 feet). Thickness: 5.0 mm (3/16 ") to 32 mm (1¼"). Width: up to 510 mm (20 ").
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Trimat TBC-1 is a semi-flexible asbestos brake lining made of hard fabric made of high-temperature synthetic material with brass wire. The woven material is impregnated with a specially designed synthetic resin, which gives a friction material with excellent stability and high wear resistance. Coefficient of friction (dynamic in oil) 0.09. Wear rate (in oil) 6.8 mm3. Mass density 1.22 g/cm3. Maximum intermittent temperature * 400 ° C (750 ° F). Maximum continuous temperature * 300 ° C (570 ° C). Maximum pressure 2.5 N/mm ² (363 psi). Maximum compression speed 25 m/s (5000 ft/min). Nominal roll length: 10 meters (33 feet). Thickness: 2.0 mm (0.08 in) to 8.0 mm.
|
Our managers will contact you and clarify the terms of the order
|