-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
A boat protection strip, also known as simply a strip, is a protective strip that is installed on the outside of a boat's hull to prevent damage from abrasion, impact, contact with moorings and other vessels. Protective strips play an important role in enhancing the durability and safety of boats by providing resistance to wear and tear during regular use in a variety of marine environments.
1-2 weeks delivery time Price incl. 19% VAT Vetus STE private vinyl beam for steel vessels. Strong massive landing beam, so that your heavy steel yacht does not suffer from any impacts during mooring, or in other situations
|
€ 1.007,90
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Radial Tessilmare Mooring Profile Base (2m or 4m) - This is a base for a mooring profile that is attached to the side of a yacht using screws. The size indicated is for the assembled profile, and the insert is purchased separately. It is supplied in 2-meter lengths, with smaller sizes available in 4-meter lengths. The larger the insert, the larger the radius of curvature. The RADIAL model has a height of A=30mm and a projection of B=17mm. The minimum bending radius is 50mm. End caps are available in white (code 44.030.01) and stainless steel (code 44.484.00).
|
€ 10,65
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Insert for Tessilmare Radial Mooring Profile (24m). Here are the details: This insert is designed for the Tessilmare Radial Mooring Profile and comes in a 24-meter roll. The size indicated is for the complete assembly with the profile, which is sold separately. The larger the insert, the greater the radius of curvature (see product specifications). The PVC profile is available in white color. Model: RADIAL 30. Dimensions: Height A - 30mm, Projection B - 17mm. Minimum bending radius - 50mm. End caps available in white (code 44.030.01) or stainless steel (code 44.484.00).
|
€ 214,32
Size, mm:
Color:
|
1-2 weeks delivery time Price incl. 19% VAT Tessilmare Bino Mooring Profile in assembly (12 m) is made of PVC. It consists of two connecting parts and can be installed without heating. Bino 40 is extremely flexible and easily adapts to strong bends in both directions. Bino 65 and 90 provide increased protection and are recommended for heavy-duty, working, military vessels, and similar applications, as well as cases where easy installation is required. The decorative stainless steel plate is purchased separately. Model: Black, Model BINO 40, Height A: 40 mm, Projection B: 22 mm, Length: 12 meters. Available end finishes: black, gray, stainless steel.
|
€ 294,68
Size, mm:
Color:
|
1-2 weeks delivery time Price incl. 19% VAT Tessilmare Bino Dock Fender End Caps are available in black and white plastic as well as stainless steel. They are designed to provide a perfect finishing touch to your Tessilmare Bino dock fender, ensuring secure and aesthetically appealing end closure.
|
€ 23,81
Size, mm:
Color:
|
1-2 weeks delivery time Price incl. 19% VAT Tessilmare Sphaera Mooring Profile Base (24m) - is a base for mooring profile that is fastened to the yacht's hull with screws. The size of the profile is indicated with the insert, which is purchased separately. There are two types available: Standard (regular version) and Slim (thin version). The set also includes a stainless steel joint cover and stainless steel end caps in both standard and slim designs. Additionally, a 3-meter stainless steel strip is included in the package.
|
€ 98,23
Type:
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Decorative stainless steel insert for Tessilmare Sphaera mooring bumper (3m) - the perfect addition to your mooring bumper. These inserts are connected using junction overlays, which are purchased separately. The height of the bumper depends on the chosen insert, which is also purchased separately. The inserts are available in three sizes: 25mm (SPHAERA 25 - 40mm profile), 35mm (SPHAERA 35 - 50mm profile), and 50mm (SPHAERA 50 - 70mm profile). The profile is made of AISI 316 stainless steel, filled with durable PVC DURALENE. These inserts can be installed on both standard and Slim bases. The planks have a length of 3 meters and are connected using junction overlays. Benefits include easy flexibility, lightweight design, and high impact resistance.
|
€ 133,94
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Introducing stainless steel coupling inserts and end caps for the Tessilmare Sphaera dock fender. These coupling inserts are designed to securely connect dock fenders, while the end caps provide a finished and aesthetically pleasing look to your structure. The height of the fender varies depending on the chosen insert, which is purchased separately. We offer inserts in three sizes: 25 mm (SPHAERA 25 - profile 40 mm), 35 mm (SPHAERA 35 - profile 50 mm), and 50 mm (SPHAERA 50 - profile 70 mm). Enhance the reliability and elegance of your Tessilmare Sphaera dock fender system with these stainless steel coupling inserts and end caps.
|
€ 15,26
Size, mm:
Item:
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Osculati Type 1 Dock Fender Base Profile (24m) for semi-circular inserts. Here are the details: The Osculati dock fender base profile is designed for installing semi-circular inserts with flared holes of Osculati Type 1. The profile height is specified, while the insert is purchased separately. The Osculati profile is supplied in 24-meter coils. The profile has a height of 30mm and a stainless steel cross-section of 15x5mm. For connection to the profile, there is an optional component available with code 44.480.11.
|
€ 228,13
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the semi-circular stainless steel insert with holes spaced at 185mm for Osculati Type 1 Dock Fender (12m). Here are the details: This D-shaped decorative insert is designed for installation on the Osculati Type 1 Dock Fender Base Profile. The profile height is specified and is purchased separately. The insert sections are indicated in the product card. The insert has a diameter A of 15mm, width B of 5mm, and weighs 500 grams per meter. The hole spacing is 185mm, with a hole diameter of 4.25mm and a countersink diameter of 7.5mm. An optional base (code: 44.480.16) is available.
|
€ 202,45
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the Osculati Type 2 Dock Fender Base Profile (24m) for Plate Inserts. Here are the details: The Osculati dock fender base profile is designed for installing plate inserts with flared holes of Osculati Type 1. The profile height is specified, while the insert is purchased separately. The Osculati profile is supplied in 24-meter coils. The profile has a height of 45mm and a stainless steel cross-section of 20x5mm. An optional component with code 44.480.20 is available for connecting to the profile.
|
€ 383,68
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Introducing the stainless steel plate insert with holes spaced at 200mm for Osculati Type 2 Dock Fender (12m). Here are the details: This decorative plate insert is 1.5mm thick and designed to be installed on the Osculati Type 2 Dock Fender Base Profile. The profile height is specified, and the profile is purchased separately. The insert sections are indicated in the product card. The insert has a dimension A of 20mm, dimension B of 4.6mm, and thickness S of 1.5mm. It is available in a length of 3 meters. The hole spacing is 200mm. Optional base components with code 44.480.33-35 are available, as well as optional end caps with code 44.484.20 for a complete installation.
|
€ 112,22
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Decorative stainless steel strip that will provide a presentable and beautiful view of your vessel. Shiny polishing and no corrosion. An ideal means to hide all the shortcomings of the side of the ship. Sizes to choose from: 21x5.5, 25x7.0, 30x9.0, 40x8.0.
|
€ 206,64
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT These high-quality end plugs for decorative strips are crafted from polished stainless steel. They offer easy attachment and provide a smoothing effect while securely holding the strip's edge. Choose only the finest products for your yacht or boat, sourced directly from Europe.
|
€ 10,21
Item:
|
What materials are used to make boat fairings?
Boat fairings, which are used to protect and enhance a boat's performance, are typically crafted from a variety of materials, including fiberglass, plastic, and composite materials. These materials are chosen for their durability, resistance to marine elements, and ability to provide streamlined shapes that minimize water resistance and improve a boat's efficiency. Boat rubbing strakes, on the other hand, are typically made from rubber or PVC materials to withstand abrasion and impact, serving as protective strips along a boat's hull.
How does a rubbing strake protect the boat's hull from damage?
A rubbing strake serves as a protective barrier along the boat's hull, effectively minimizing the risk of damage. It absorbs and disperses impact forces, preventing direct contact between the boat and potentially damaging objects such as docks, other vessels, or debris. The rubber or PVC construction of the rubbing strake also reduces friction and abrasion, safeguarding the boat's hull against wear and tear over time.
Are there any special instructions for the maintenance or care of boat chocks?
While boat chocks themselves don't require extensive maintenance, they are often mounted on or near rubbing strakes. To ensure the longevity of both the chocks and the rubbing strakes, it's essential to regularly inspect them for any signs of wear, damage, or loose fittings. Additionally, keeping the rubbing strakes clean and free from debris and contaminants will help maintain their effectiveness in protecting the boat's hull.