1-2 weeks delivery time Price incl. 19% VAT Pillar fairlead in composite material abrasion resistant. For clamcleat art. 7878730/5. |
€ 2,92
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Pillar fairlead in composite material abrasion resistant. For clamcleat art. 7878731/7. |
€ 3,54
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Pillar fairlead in composite material abrasion resistant. For clamcleat art. 7878731/7. |
€ 3,54
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Pillar fairlead in composite material abrasion resistant. For clamcleat art. 7878731/7. |
€ 3,54
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Pillar fairlead in composite material abrasion resistant. For clamcleat art. 7878731/7. |
€ 3,54
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Fastening to the pulpit or railing with Velcro straps. |
€ 9,42
-
+
|
1-2 weeks delivery time Price incl. 19% VAT A simple cleat design to enable halyard tails and control lines to be stowed neatly, ready for use and helping prevent snags. Dim. mm length 73, width 30, depth 13. Pack 2 pcs. |
€ 13,08
-
+
|
1-2 weeks delivery time Price incl. 19% VAT A simple cleat design to enable halyard tails and control lines to be stowed neatly, ready for use and helping prevent snags. Dim. mm length 73, width 30, depth 13. Pack 2 pcs |
€ 13,08
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Mesh bottom for water draining. Mesh front pocket for small objects. Mounting with 4 suction cups (included) or with 4 SS eyelets. Dim. cm. 31X37 |
€ 27,97
-
+
|
1-2 weeks delivery time Price incl. 19% VAT In nylon whith eyelet. Dim. cm. 20X35 |
€ 4,66
-
+
|
1-2 weeks delivery time Price incl. 19% VAT In nylon with handle. |
€ 9,31
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Mounting to the pulpit or to the stays by means of its flap with Velcro or of its ribbons with buckle (included). Mesh bottom for water draining. |
€ 24,89
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Halyard stowage bags in royal blue Dralon with fastening eyelets, mesh canavas, batten and grommets |
€ 41,61
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Halyard stowage bags in royal blue Dralon with fastening eyelets, mesh canavas, batten and grommets |
€ 45,32
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Halyard stowage bags in royal blue Dralon with fastening eyelets, mesh canavas, batten and grommets |
€ 48,54
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The boomstrutТ lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of:Х 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.Х High quality Spectro anodised aluminium mast and boom fittings.Х Stainless steel fastenings.No servicing requirements. Carefully constructed to eliminate sharp edges and save damage to sails.Boomstrut benefitsХ Supports the boom at all times.Х Prevents accidents when the topping lift is incorrectlyset or adjusted.Х Safer sail handling in bad weather or when sailingshort handed (reefing, raising or loweringmainsail).Х Lightweight, saves windage aloft.Х Immediate smooth response. No adjustmentsneeded.Х No requirement for a topping lift, it providesan additional mainsail halyard.Х Fits all types of mast and boom extrusions,and can be easily shorten by simple cutting witha fine-toothed hacksaw. |
€ 285,82
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The boomstrutТ lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of:Х 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.Х High quality Spectro anodised aluminium mast and boom fittings.Х Stainless steel fastenings.No servicing requirements. Carefully constructed to eliminate sharp edges and save damage to sails.Boomstrut benefitsХ Supports the boom at all times.Х Prevents accidents when the topping lift is incorrectlyset or adjusted.Х Safer sail handling in bad weather or when sailingshort handed (reefing, raising or loweringmainsail).Х Lightweight, saves windage aloft.Х Immediate smooth response. No adjustmentsneeded.Х No requirement for a topping lift, it providesan additional mainsail halyard.Х Fits all types of mast and boom extrusions,and can be easily shorten by simple cutting witha fine-toothed hacksaw. |
€ 404,57
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The boomstrutТ lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of:Х 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.Х High quality Spectro anodised aluminium mast and boom fittings.Х Stainless steel fastenings.No servicing requirements. Carefully constructed to eliminate sharp edges and save damage to sails.Boomstrut benefitsХ Supports the boom at all times.Х Prevents accidents when the topping lift is incorrectlyset or adjusted.Х Safer sail handling in bad weather or when sailingshort handed (reefing, raising or loweringmainsail).Х Lightweight, saves windage aloft.Х Immediate smooth response. No adjustmentsneeded.Х No requirement for a topping lift, it providesan additional mainsail halyard.Х Fits all types of mast and boom extrusions,and can be easily shorten by simple cutting witha fine-toothed hacksaw. |
€ 426,55
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The boomstrutТ lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of:Х 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.Х High quality Spectro anodised aluminium mast and boom fittings.Х Stainless steel fastenings.No servicing requirements. Carefully constructed to eliminate sharp edges and save damage to sails.Boomstrut benefitsХ Supports the boom at all times.Х Prevents accidents when the topping lift is incorrectlyset or adjusted.Х Safer sail handling in bad weather or when sailingshort handed (reefing, raising or loweringmainsail).Х Lightweight, saves windage aloft.Х Immediate smooth response. No adjustmentsneeded.Х No requirement for a topping lift, it providesan additional mainsail halyard.Х Fits all types of mast and boom extrusions,and can be easily shorten by simple cutting witha fine-toothed hacksaw. |
€ 474,85
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The boomstrutТ lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of:Х 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail.Х High quality Spectro anodised aluminium mast and boom fittings.Х Stainless steel fastenings.No servicing requirements. Carefully constructed to eliminate sharp edges and save damage to sails.Boomstrut benefitsХ Supports the boom at all times.Х Prevents accidents when the topping lift is incorrectlyset or adjusted.Х Safer sail handling in bad weather or when sailingshort handed (reefing, raising or loweringmainsail).Х Lightweight, saves windage aloft.Х Immediate smooth response. No adjustmentsneeded.Х No requirement for a topping lift, it providesan additional mainsail halyard.Х Fits all types of mast and boom extrusions,and can be easily shorten by simple cutting witha fine-toothed hacksaw. |
€ 665,46
-
+
|