1-2 weeks delivery time Price incl. 19% VAT Dual action single lever for throttle and hydraulic gearbox. Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5-C16 and Mach 5 need kit K35 art. 4242069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting. |
€ 279,84
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Dual action single lever for throttle and hydraulic gearbox. Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5-C16 and Mach 5 need kit K35 art. 4242069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting. |
€ 279,84
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Top and side mount dual action controls with lever lock devicefor throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the neutralposition. The model B184 has in the hand levers a trim switch to adjust tilt ofoutboard and stern-drive. Suitable for all type of control cables C2-C8-C14 and Mach0-Mach14. C5-C16-Mach 5cables need adapter kit K35, art. 4242069. |
€ 241,12
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Top and side mount dual action controls with lever lock device and trim switch for throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the neutralposition. The model B184 has in the hand levers a trim switch to adjust tilt ofoutboard and stern-drive. Suitable for all type of control cables C2-C8-C14 e Mach0-Mach14. C5-C16 and Mach 5cables need adapter kit K35, art. 4242069. |
€ 345,84
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Top and side mount dual action controls With lever lock device, hand lever withoutjut for use on sailing bofor throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the neutralposition. The model B184 has in the hand levers a trim switch to adjust tilt ofoutboard and stern-drive. Suitable for all type of control cables C2-C8-C14 e Mach0-Mach14. C5-C16 and Mach 5cables need adapter kit K35, art. 4242069. |
€ 234,08
-
+
|
1-2 weeks delivery time Price incl. 19% VAT |
€ 5,63
-
+
|
1-2 weeks delivery time Price incl. 19% VAT |
€ 14,03
-
+
|
1-2 weeks delivery time Price incl. 19% VAT |
€ 14,03
-
+
|
1-2 weeks delivery time Price incl. 19% VAT |
€ 3,36
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Two lever single action control, throttle + shift, bent hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forward, neutral or reverse. Friction drag and release areadjustable from exterior. Neutral safety switch X12 (optional) to preventstarting in gear. Available with bent or straight levers. Models B58and B59 supplied with safety lock to avoid accidental engaging of gearwhen throttle is on. Suitable cables C2 Ц C8 Ц Mach Zero Ц 33 C.Cable C22 needs kit K22 art. 4242063. |
€ 391,60
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Two lever single action control, throttle + shift straight hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forward, neutral or reverse. Friction drag and release areadjustable from exterior. Neutral safety switch X12 (optional) to preventstarting in gear. Available with bent or straight levers. Models B58and B59 supplied with safety lock to avoid accidental engaging of gearwhen throttle is on. Suitable cables C2 Ц C8 Ц Mach Zero Ц 33 C.Cable C22 needs kit K22 art. 4242063. |
€ 391,60
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Dual lever control single action, suitablefor any engine with hydraulic gear. Release on gear and adjustablefriction. Wear Cables C2 Ц C8 Ц Mach Zero.For cable C22 kit k32 art. 4242064. |
€ 566,90
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Dual Action controls box for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. They use the cables for the C2-C8-C14 and Mach 0-14 motor controls. With the C5-C16 and Mach 5 cable you need the K35 adaptation kit art. 4242069. |
€ 451,44
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Dual Action controls box for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. They use the cables for the C2-C8-C14 and Mach 0-14 motor controls. With the C5-C16 and Mach 5 cable you need the K35 adaptation kit art. 4242069. |
€ 367,84
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Dual Action controls box with trim for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. They use the cables for the C2-C8-C14 and Mach 0-14 motor controls. With the C5-C16 and Mach 5 cable you need the K35 adaptation kit art. 4242069. |
€ 461,12
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Single lever dual action for one engine controls for throttle and gear.Suitable for any type of boats with outboard, inboard and sterndrive equipped for power plants. Enables easy and safe shifting by preventingaccidental gear engagement unless engine is idling. Made of cast and chrome aluminum. Pull-out handle disengages shift for warm engine. Throughthe safety switch X43 art. 4242065 (optional) you get the engine to start only in neutral. Internally fitted with friction. Use the cables C2, C8 and Mach 0.Conforms to EN 11547, in the presence of the safety switch X43. |
€ 359,92
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Single lever dual action for two engines controls for throttle and gear.Suitable for any type of boats with outboard, inboard and sterndrive equipped for power plants. Enables easy and safe shifting by preventingaccidental gear engagement unless engine is idling. Made of cast and chrome aluminum. Pull-out handle disengages shift for warm engine. Throughthe safety switch X43 art. 4242065 (optional) you get the engine to start only in neutral. Internally fitted with friction. Use the cables C2, C8 and Mach 0.Conforms to EN 11547, in the presence of the safety switch X43. |
€ 638,88
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Control boxes built in die-cast aluminum and chrome-plated for an engine suitable for any type of boat with outboard motor, inboard and stern drives. Use C2 - C8 - C14 - Mach Zero - Mach 14 cables. With K60 kit: C5-C16-Mach5. With kit K62: C36-Mach36. With kit K61: C22 |
€ 484
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Control boxes built in die-cast aluminum and chrome-plated for an engine suitable for any type of boat with outboard motor, inboard and stern drives. Use C2 - C8 - C14 - Mach Zero - Mach 14 cables. With K60 kit: C5-C16-Mach5. With kit K62: C36-Mach36. With kit K61: C22 |
€ 810,48
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Dual Action controls box for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. They use the cables for the C2-C8-C14 and Mach 0-14 motor controls. With the C5-C16 and Mach 5 cable you need the K35 adaptation kit art. 4242069. |
€ 792
-
+
|