Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT This pump is designed specifically for the intake and supply of oil in especially large two-stroke diesel engines. It combines advantages such as: good suction capacity and adaptation to pressure changes in the system. The pump is placed in a settling tank supported by a dome flange. Robust design ensures reliable operation with low vibration, low operating costs, high reliability.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Desmi VAC is a compact pump that combines all the best from membrane, piston and centrifugal pumps. It will operate continuously, thanks to a specially designed rotor, with any liquids, gases or mixtures thereof. Designed for pumping liquids up to 80 ° C. The capacity is up to 85 m3/h. Head - up to 20 m of water. Advantages: ability to pump air, wear resistance, dry protection, lack of diaphragm, light weight, compact design.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Universal gear pump made of cast iron for clean, non-abrasive liquids. The simple and compact design makes it one of the most economical pumps. Used with IEC or NEMA flange motors. Angular modification is possible. Designed for pumping non-corrosive liquids with viscosity - up to 7500 s. St, temperature - up to 150 ° C. Capacity - up to 50 m3/h. Allowable pressures - up to 16 bar. Suction vacuum - up to 0.5 bar. Pumping vacuum - up to 0.8 bar. Application: oil pump, fuel pump.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT DESMI SA self-filling centrifugal pumps operating on the diffuser principle, as a result of which the air present in the suction pipeline is not an obstacle to suction. Due to the special design of the impeller, this pump also pumps contaminated liquids well without loss of productivity. It is used in shipbuilding, agriculture, industry as: bilge pump, ballast pump, fire pump, coolant pump, deck washing pump, fuel pump, well pump.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Desmi NSA pump series is a completely updated series of the original K&R series. However, it is completely interchangeable with the old series, both in size and performance. These pumps are compact, simple and, as a result, easy to maintain and low cost. The NSA sets new standards for economy and reliability. Designed for pumping clean and contaminated liquids from 0 to 80 ° S. Using a special shaft seal up to 140 ° S. Application: ballast pump, bilge water pump, drinking water pumps, emergency fire pump, cooling water pump. It can be made of cast iron or bronze, to choose from.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The DESMI Modular H centrifugal pump is an improved single-stage modular version of the well-known Modular S series pump. The goal was to create a non-suction pump based on the S series components. The H series of pumps was developed in accordance with the most advanced developments and, as a result, the H series pumps turned out to be compact and convenient to install and dismantle. Due to the deep implementation of the latest developments, Modular H is superior to the S Series in both efficiency and performance. All modules except the vessel pump housing are interchangeable with the MODULAR S series. It consists of: pump housing, impeller, bearing housing, suction part, shaft seal cover.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT DESMI ESL pumps are designed for high performance operation with low NPSH values. They are easy to install and maintain. They are used in various systems. All ESL models are equipped with mechanical shaft seals to achieve the longest possible service life and minimize friction losses. Impellers with double curved blades provide high efficiency and low NPSH performance. Capacity up to 200 m3/h
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT DESMI DSL pumps are centrifugal, single stage, vertical double suction pumps. The special design of the suction cavity provides an ideal flow, and the suction and discharge flanges are on the same line. Add improved dual suction impellers to this and you will get high efficiency and low NPSH values. It is used for pumping ballast and cooling water, heat supply and electric generation.
If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT DESMI Modular S centrifugal pump is a special self-suction pump designed for pumping clean and contaminated liquids at temperatures up to 80 ° C. With the use of a special seal - up to 140 ° C. Pumps of the Modular S series are widely used in various systems and installations: for pumping seawater, as a fire pump, as a fire pump with diesel drive, on general-purpose systems.
Performance range: 1-350 m3/h at 50 cycles; 2-400 m3/h at 60 cycles. Pressure range: 1-100 mV at 50 cycles; 2-150 mV at 60 cycles. If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT DESMI NSL - centrifugal ship pump with capacity up to 3800 m3/h. This high-quality model has proven itself well in that it has high energy efficiency and a long service life. Impeller is made with double curved blades, due to which low NPSH value and high efficiency are achieved. NSL series pumps are widely used in various systems and installations. A wide selection of modifications is possible.
Temperature range: - with standard mechanical shaft seal - max. 80 ° C; - with special mechanical shaft seal - max. 120 ° C. Pressure Range 5-100 mV at 50 Hz; 5-140 mV at 60 Hz. If you do not find the DESMI centrifugal pump model of interest - contact our specialist or follow the request on the website, we will definitely find the right option and inform you about the cost and delivery time.
|
Our managers will contact you and clarify the terms of the order
|