Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT Fairlead is a rigging for boats to use mooring. It consists of a roller system.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Hydraulic system for the rear cabin up to 70 tons, available in 4 models. The two-winch solution is a complex hydraulic winch specially designed for installation in the rear cabin of refrigerated trucks. Fully equipped hydraulic unit. Oil tank, hoses, pump, control valves, etc.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Starter rolls available in 11 different models that allow mooring ropes to be guided by boat. The post with a cruciform head made of bronze. Maritime protection. Only the best products for you from Europe.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Compact Starter ST hydraulic winch available in 13 models. It is a lifting winch with linear lifting, this row is especially suitable for installation on cranes. Orbital or piston hydraulic motor. Negative multi-disc brake. Very compact design, important line speed, this range is especially suitable for mounting on cranes and frames. The choice of models: STNP05, STNP08, STNP10, STP9/E, STP15, STP15/E, STSE25, STSE30, STSE35, STSE45, STSRDA60, STSRDB80, STSRDA100.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT A stopper is a device that allows you to stop the lowering of the chain, it provides relief on the braid saw, absorbs static charge when mooring. It is used to secure the anchor, which is fully lifted when the boat moves. SCS: Designed to withstand 80% of the circuit break load.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Compatible with the electric or hydraulic range of Starter winches, this device provides better rope winding, prevents sharp burrs and provides better cable life.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT A Starter winch gripper block available in three models. A crescent moon made of aluminum alloy with anti-wear treatment. HMPE suspension with protective cover. Safety factor 3:1. Weight: 8 to 12 kg. Suitable for the military or transport sphere.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Special Starter pulleys for deflection have been specifically designed for winch applications and provide high reliability and reduce friction so that there is no loss of traction. For synthetic and steel ropes from Ø 9 to Ø 22 mm, from 30 ° to 180 ° deviations. Adapts to each chassis. High efficiency. Easy integration.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Minivan 100 lift crane for a transponder with a maximum lifting capacity of 100 kg. This mobile crane is designed specifically for Kangoo, Jumpy, Scudo minivans. Height: 1.10 m. Handle length: 1 m. 360 ° rotation. Complies with EU regulations. Total weight: 27 kg.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Starter L100 crane with a maximum lifting capacity of 250 kg. It is a unique installation made in France. The weight assembled is 50 kg. Drum height: 1.70 m. Handle length: 1.1 m. 360 ° rotation. Complies with CE standards.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Starter DRAKAR is a hydraulic pull winch. The balancing machine is bolted to the vehicle frame for a long service life. A spare wheel support with a 300 daN lift can be added to the plug frame. Orbital hydraulic motor. The negative multi-disc brake is automatically controlled by the brake valve. Possible configuration for the industrial, transport and military sectors.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Starter CPV-CPH - autonomous hydraulic kabestan, available in 8 models, at choice: CPV10E/CPH10E, CPV16E/CPH16E, CPV23E/CPH23E, CPV34E/CPH34E, CPV55E/CPH55E, CPV75E/CPH75E, CPV100E/CPH100E, CPV150E/CPH150E. Built for installation on deck, below deck or with a mixed structure. Electric, hydraulic or air motor. Corner bracket or tubular frame.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Starter AXOR is a compact winch with an overhanging drum, available in 11 models. The Axor compact winch has a basic and economical design that requires very low maintenance. Electric, hydraulic or air motor. Coaxial gearbox, oil bath. Overhanging drum. Simple and compact design with very low service levels.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Starter AUROK multipurpose winch introduced in 8 models. Easy installation (in 5 minutes) and control. You can install it anywhere. Several installation options. Wall or floor mounting. Lifting and traction applications, drum protection. Fastening with bolts or hook. Built-in frequency converter. Compact portable design. It is already supplied "ready for use." Intuitive speed control system. 230 V single phase and 400 V three phase. Model selection: AUROK 350, AUROK 350 LT, AUROK 500, AUROK 500 LT, AUROK 800, AUROK 800 LT, AUROK 1,300, AUROK 1,300 LT.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Fully self-contained hydraulic winch system with Starter AUDIN diesel engine, carrying capacity from 9 to 45 tons. Hydraulic unit: diesel engine with built-in fuel tank, fully equipped hydraulic unit (filters, valve, pump, oil tank, etc.). Winch: orbital hydraulic motor, oil bath, negative hydraulic multi-disc brake, manual or air clutch. Chassis: bolted and welded compact steel chassis, lifting rings. Heavy duty push roller, wired remote control, spare wheel stand with lifting platform 300 kg.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Atlas UC is a hydraulic compact winch, and is currently the most compact model. They can be integrated into the most sophisticated and fully equipped vehicles. This product is available in 8 to 28 ton traction models. Atlas Hydraulic Compact Winch has the lowest operating service on the market. Components: orbital hydraulic motor, oil of planetary reduction gear is lubricated with oil, manual coupling, bolt frame, shaft, additional driving pulley. Choice of models: ATLAS UC L 8T, ATLAS UC L 10T, ATLAS UC 16T, ATLAS UC 19T, ATLAS UC 23T, ATLAS UC 28T.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Starter ATLAS TC 12,000daN hydraulic traction winch with drum on side rail. It has an unlimited cable length with a full rope control system. No friction throughout the system, which significantly improves the life of the rope. A permanent place for the cable to exit, simplifying routing even with limited space.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Atlas P pull-out hydraulic winch is designed for the front, rear cabin or seat belts. The perfect balance between compactness, durability and ease of installation. This hydraulic winch is equipped with a planetary gearbox lubricated with an oil bath, a negative hydraulic brake and an orbital hydraulic motor. Advantages: compactness, reliability, ease of installation.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Starter ATLAS L hydraulic winch is available in three models: ATLAS 100 L, ATLAS 120 L, ATLAS 160 L. Equipped with an automatic unwinding device for better control, and a hydraulic brake, this hydraulic winch can perform accurate processing operations from 8 to 16 tons of effort. Specially designed for side mounting. Planetary reduction oil bath is lubricated.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Starter ATLAS C is a hydraulically driven traction winch designed for the front, rear cab or on lifting levers. This winch is the perfect balance between compactness, reliability and ease of installation. It is equipped with a planetary gearbox lubricated with oil, a negative hydraulic brake and an orbital hydraulic engine.
|
Our managers will contact you and clarify the terms of the order
|
Show more
1
2