Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT The TANDLER Standard Series Spiral Tapered Gearbox provides high-performance, high-precision torque transmission with minimal clearance. They are quiet, shock-resistant, very reliable and compact. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size )/i = n 1: n 2 = 1:1 to 1:2 (depending on gearbox size). Depending on the ratio and version, TANDLER gearboxes are also available for any application.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER SP2 Planetary Conical Gearbox is ideal for any application that requires shaft phasing, accurate recording or narrow range speed control. The forward or reverse modulation rate is generated when the worm shaft d3, which engages the outer sun wheel, rotates. Spiral bevel gears made of alloy steel, hardened and fastened to ensure better contact with the surface. Shaft ratios d1: i = n1: n2 = 1.66: 1; 1,33: 1; 1: 1 ; 1: 1,2; 1: 1,5 ; 1: 2 ; 1: 3; 1: 3.75. Shaft ratios d2: i = n2: n1 = 4.5: 1; 3,75: 1; 3: 1; 2: 1 ; 1,5: 1 ; 1,2: 1; 1: 1 ; 1: 1,33. Shaft ratios d3: i = 135:1. Maximum torque: 2500 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER S spiral conical gearbox where the output shaft can be disconnected from the input shaft (AS series). It adds the ability to change the direction of the output shaft. Ratios: i = n 1: n 2 = 1:1 to 3:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER single-stage planetary speed modulation system is PE2 for any application requiring shaft phasing, accurate recording, or narrow range speed control. The forward or reverse modulation rate is generated when the worm shaft d3, which engages the outer sun wheel, rotates. Spiral bevel gears made of alloy steel, hardened and fastened to ensure better contact with the surface. Shaft ratios d1: i = n1: n2 = 3:1. Shaft ratios d2: i = n2: n1 = 1:3. Shaft ratios d3: i = n3: n2 = 135:1 and i = n3: n1 = 45:1. Maximum torque: 2500 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER AS is a spiral conical gearbox where the output shaft can be disconnected from the input shaft. It adds the ability to change the direction of the output shaft. Ratios: i = n 1: n 2 = 1:1 to 3:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The standard PowerMaster HL gearbox is a high-performance gearbox compared to other known spiral conical units, and it is the same size and can transmit extremely high torque. It has inlet and outlet shafts of large diameter. These gearboxes are used where high torque transmission in a small space is required. Ratios: i = n 1: n 2 = 1:1 to 3:1.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER KD Differential Conical Transmission Coaxial Gearbox for any application requiring shaft phasing, accurate recording or narrow range speed control. The forward or reverse modulation rate is generated when the worm shaft d3, which engages the outer sun wheel, rotates. Spiral bevel gears made of alloy steel, hardened and fastened to ensure better contact with the surface. Shaft ratios d1: i = n1: n2 = 2:1. Shaft ratios d3: i = n3: n2 = 36: 1/i = n3: n1 = 72:1. Maximum torque: 2500 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWK Straight Single Spline Helical Conical Gearbox, ideal for direct connection of drive shafts and for special connection shafts. By eliminating clutches, they provide a compact solution for transmitting torque in small spaces. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER VA stainless steel gearboxes are used wherever the highest corrosion protection requirements exist, for example in wet conditions and especially when exposed to seawater. In some sectors of the food industry, their use is now mandatory due to the rules. For any application, we can put a gearbox on a custom basis.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Keyway HW is a spiral conical gearbox with a hollow shaft ideal for direct connection of drive shafts and for installation of special connecting applications. They provide a compact solution for transmitting torque in small rooms. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT With a constant direction of input shaft d1, the direction of rotation of the through shaft (d2 gears) can be switched to rotation in the same or opposite direction. The gearbox can be supplied with or without the d1 shaft. Ratios: i = n 1: n 2 = 1:1 to 2:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER PDS is a modular speed dual planetary coaxial gearbox that is suitable for high frequencies and can transmit a third of the gearbox torque of the same size. The PD2 and PDS gearboxes have the same external dimensions, and the same size can be replaced according to performance. Shaft ratios d1: i = n1: n2 = 1: 1/i = n1: n2 = 1:1. Shaft ratios d3: i = n3: n1 = n3: n2 = 135: 1/i = n3: n1 = n3: n2 = 45:1. Maximum. torque: 2500 Nm/830 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER WV bevel gearbox with a reinforced shaft is commonly used in linear drive applications, where from the moment of exit from the main drive shaft, only part of the total torque is removed from different intervals. This is a great alternative to expensive models, since full torque is not transmitted through gears. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER F conical gearbox model with different flange designs and hollow input shaft, keyway. It can be assembled on almost any AC or DC engine available on the market. ServoFoxx® gearboxes are used for highly dynamic servo motors. Ratios: i = n 1: n 2 = 1:1 bis 6:1 (depending on gearbox size )/i = n 1: n 2 = 1:1 bis 1:2 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER HRZ hollow gear bevel gearbox provides direct connection to drive shafts and splines as per DIN 5482. No connection required. Ratios: i = n 1: n 2 = 1:1 to 2:1 (depending on gearbox size )/i = n 1: n 2 = 1:1 to 1:2 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWS Spiral Conical Gearbox model with shrink disc and hollow shaft for direct connection of drive shafts and for installation of special connecting applications. Compact solution for torque transmission in small rooms. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Spiral-type conical gearbox with internal involute spline HWZ for connection of drive shafts and for installation of special connecting units. By eliminating clutches, they provide a compact solution for transmitting torque in small spaces. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER PowerMaster HW | HWS series of spiral conical gearboxes with hollow shafts are ideal for direct connection of drive shafts and for installation of special connecting shafts. By eliminating clutches, they provide a compact solution for transmitting torque in small spaces. Various versions are available with a keyway, straight splines, involute splines and a shrink disc. Ratios: i = n 1: n 2 = 1:1 to 3:1.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER PD2 dual planetary speed gearbox is a strong coaxial gearbox with a modular speed. This gearbox is suitable for high frequencies and can transmit a third of the gearbox torque of the same size. The PD2 and PDS gearboxes have the same external dimensions, and the same size can be replaced according to performance. Shaft ratios d1: i = n1: n2 = 1: 1/i = n1: n2 = 1:1. Shaft ratios d3: i = n3: n1 = n3: n2 = 135: 1/i = n3: n1 = n3: n2 = 45:1. Maximum. torque: 2500 Nm/830 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER ServoFoxx PL2 FS Planetary gearbox is a standard very low reflection version designed specifically for use with highly dynamic servo motors. With two, three or even four pinion stages, ratios up to 10,000: 1 can be achieved. Relations: i = n 1: n 2 = 3:1 to 10:1 are possible.
|
Our managers will contact you and clarify the terms of the order
|
Show more
1
2