Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT The TANDLER WV bevel gearbox with a reinforced shaft is commonly used in linear drive applications, where from the moment of exit from the main drive shaft, only part of the total torque is removed from different intervals. This is a great alternative to expensive models, since full torque is not transmitted through gears. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT With a constant direction of input shaft d1, the direction of rotation of the through shaft (d2 gears) can be switched to rotation in the same or opposite direction. The gearbox can be supplied with or without the d1 shaft. Ratios: i = n 1: n 2 = 1:1 to 2:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER VA stainless steel gearboxes are used wherever the highest corrosion protection requirements exist, for example in wet conditions and especially when exposed to seawater. In some sectors of the food industry, their use is now mandatory due to the rules. For any application, we can put a gearbox on a custom basis.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER Standard Series Spiral Tapered Gearbox provides high-performance, high-precision torque transmission with minimal clearance. They are quiet, shock-resistant, very reliable and compact. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size )/i = n 1: n 2 = 1:1 to 1:2 (depending on gearbox size). Depending on the ratio and version, TANDLER gearboxes are also available for any application.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER SP2 Planetary Conical Gearbox is ideal for any application that requires shaft phasing, accurate recording or narrow range speed control. The forward or reverse modulation rate is generated when the worm shaft d3, which engages the outer sun wheel, rotates. Spiral bevel gears made of alloy steel, hardened and fastened to ensure better contact with the surface. Shaft ratios d1: i = n1: n2 = 1.66: 1; 1,33: 1; 1: 1 ; 1: 1,2; 1: 1,5 ; 1: 2 ; 1: 3; 1: 3.75. Shaft ratios d2: i = n2: n1 = 4.5: 1; 3,75: 1; 3: 1; 2: 1 ; 1,5: 1 ; 1,2: 1; 1: 1 ; 1: 1,33. Shaft ratios d3: i = 135:1. Maximum torque: 2500 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER ServoFoxx planetary gearbox is SKP2 suitable for non-servo applications that require right angle motors with high coefficients and high torques. Therefore, the SKP2 is a continuation of the standard spiral conical gearbox. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The standard TANDLER ServoFoxx SKP2 FS2 planetary gearbox integrates the helical bevel and planetary gearbox range to provide maximum planetary gearbox torque on the d2 output shaft. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Planetary conical gearbox with TANDLER input shaft PSK2 spiral type for conventional mechanical drives without servo drive. Due to the possibility of high coefficients, the gearbox is PSK2 especially useful for emergency manual drive, while the hand wheel is simply mounted on the input shaft. In addition, it is possible to use the gearbox in motor drives without any restrictions. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The standard version of the TANDLER PSK2 FS planetary cone gearbox. A rectangular drive that offers output parameters of spiral bevel gears with even higher coefficients. An input planetary stage in four sizes, suitable for any desired engine. External spiral conical stage for powerful options such as hollow shaft, commutation up to five outputs. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size)
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWZ spiral conical gearbox model for powerful options such as hollow shaft, commutation or up to five output shafts. Gearbox dimensions can be combined and optimized for maximum output torque. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWS spiral conical output gearbox is a cascade of powerful options such as hollow shaft, commutation or up to five output shafts. Gearbox dimensions can be combined and optimized for maximum output torque. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWK rectangular drives, which offer output versions of spiral conical gearboxes with even higher coefficients. Planetary input stage in four sizes, suitable for mounting almost any engine. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Planetary conical gearbox with hollow shaft TANDLER PSK2 FS HW. Rectangular drives offering output versions of spiral conical gearboxes with even higher coefficients. Planetary input stage in four sizes, suitable for mounting almost any engine. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT A planetary gearbox with a TANDLER PL2 input shaft, also available without an engine flange and coupling. On the input side there is an input shaft with a key, this gearbox is identical to the PL2 FS series. The input shaft of the planetary gear can be easily integrated into existing power units. Ratios: i = n 1: n 2 = 3:1 to 10:1, multi-speed transmissions with coefficients up to 10,000: 1 are possible
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER ServoFoxx PL2 FS Planetary gearbox is a standard very low reflection version designed specifically for use with highly dynamic servo motors. With two, three or even four pinion stages, ratios up to 10,000: 1 can be achieved. Relations: i = n 1: n 2 = 3:1 to 10:1 are possible.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER ServoFoxx ® planetary gearbox series P (one- and two-stage) is a new development from Thunder, completely independent of the existing ServoFoxx ® planetary gearbox. Five sizes are available with coefficients ranging from 3:1 to 100:1. All P-series gearboxes are lubricated with grease, which will last for the entire service life. External surfaces of the gearbox housing, including aluminum, corrosion-resistant. Relations with input on shaft d1: i = n1: n2. Single-stage: 3:1; 4: 1; 5: 1; 7: 1; 10: 1. Maximum output torque: 3300 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER FS2 HWZ flange and hollow shaft conical gearbox model allows motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER FS2 HWS Hollow Shaft Servo Bevel Gearbox allows motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER FS2 HWK hollow shaft tapered gearbox allows the motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER FS2 HW - conical gearbox with flange and hollow shaft. This hollow shaft servo tapered gearbox allows motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
Show more
1
2