Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT A planetary gearbox with a TANDLER PL2 input shaft, also available without an engine flange and coupling. On the input side there is an input shaft with a key, this gearbox is identical to the PL2 FS series. The input shaft of the planetary gear can be easily integrated into existing power units. Ratios: i = n 1: n 2 = 3:1 to 10:1, multi-speed transmissions with coefficients up to 10,000: 1 are possible
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER ServoFoxx ® planetary gearbox series P (one- and two-stage) is a new development from Thunder, completely independent of the existing ServoFoxx ® planetary gearbox. Five sizes are available with coefficients ranging from 3:1 to 100:1. All P-series gearboxes are lubricated with grease, which will last for the entire service life. External surfaces of the gearbox housing, including aluminum, corrosion-resistant. Relations with input on shaft d1: i = n1: n2. Single-stage: 3:1; 4: 1; 5: 1; 7: 1; 10: 1. Maximum output torque: 3300 Nm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER ServoFoxx FS2 flanged standard servo converter is a conical gearbox in the standard version that allows you to connect motors directly to a high-precision straight-line gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER FS2 HW - conical gearbox with flange and hollow shaft. This hollow shaft servo tapered gearbox allows motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER FS2 HWS Hollow Shaft Servo Bevel Gearbox allows motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER FS2 HWK hollow shaft tapered gearbox allows the motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER FS2 HWZ flange and hollow shaft conical gearbox model allows motors to be connected directly to a high precision rectilinear gearbox. The output shaft can be solid, hollow, switched or multiplied to give up to five outputs. Ratios: i = n 1: n 2 = 1:1 to 6:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The standard version of the TANDLER PSK2 FS planetary cone gearbox. A rectangular drive that offers output parameters of spiral bevel gears with even higher coefficients. An input planetary stage in four sizes, suitable for any desired engine. External spiral conical stage for powerful options such as hollow shaft, commutation up to five outputs. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size)
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Planetary conical gearbox with TANDLER input shaft PSK2 spiral type for conventional mechanical drives without servo drive. Due to the possibility of high coefficients, the gearbox is PSK2 especially useful for emergency manual drive, while the hand wheel is simply mounted on the input shaft. In addition, it is possible to use the gearbox in motor drives without any restrictions. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Planetary conical gearbox with hollow shaft TANDLER PSK2 FS HW. Rectangular drives offering output versions of spiral conical gearboxes with even higher coefficients. Planetary input stage in four sizes, suitable for mounting almost any engine. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWS spiral conical output gearbox is a cascade of powerful options such as hollow shaft, commutation or up to five output shafts. Gearbox dimensions can be combined and optimized for maximum output torque. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWK rectangular drives, which offer output versions of spiral conical gearboxes with even higher coefficients. Planetary input stage in four sizes, suitable for mounting almost any engine. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HWZ spiral conical gearbox model for powerful options such as hollow shaft, commutation or up to five output shafts. Gearbox dimensions can be combined and optimized for maximum output torque. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The standard TANDLER ServoFoxx SKP2 FS2 planetary gearbox integrates the helical bevel and planetary gearbox range to provide maximum planetary gearbox torque on the d2 output shaft. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER ServoFoxx planetary gearbox is SKP2 suitable for non-servo applications that require right angle motors with high coefficients and high torques. Therefore, the SKP2 is a continuation of the standard spiral conical gearbox. Ratios: i = n 1: n 2 = 3:1 to 60:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The TANDLER ServoFoxx ® HYP FS2 hypoid gearbox comes standard with an equal output shaft. The key on the output shaft can be as a free option. Thanks to the single-stage design (ratios up to 15:1), a very low gap is achieved. This model is suitable for almost any servomotor. Ratios: i = n 1: n 2 = 5:1 to 15:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT HYP FS2 HW hypoid gearbox from TANDLER with hollow shaft or with and shrinkable disc. The output side is configured as a hardened and grounded hollow shaft with a keyway. Thus, a simple connection through the shaft and the key is possible. The high surface hardness of the shaft prevents problems with the positive connection. Ratios: i = n 1: n 2 = 5:1 to 15:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HYP FS2 HW - hypoid gearbox with hollow shaft or with and shrinkable disk. The HWS design with a grounded hollow shaft and a shrink disk has a strong positive connection. The device is absolutely resistant to shock or reversing loads. Ratios: i = n 1: n 2 = 5:1 to 15:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Hypoid gearbox with flange and hollow shaft TANDLER HYP FS2 RF. Thanks to the RF design, the gearbox is designed in accordance with EN ISO 9409-1 and can be installed on a flange. Therefore, this device is the best as an alternative to conventional planetary gearboxes, since the right output angle retains an important place for installation. Ratios: i = n 1: n 2 = 5:1 to 15:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT TANDLER HYP RF HW is a hypoid reducer with flange expansion in accordance with EN ISO 9409-1 and a hollow shaft that allows power lines, cables or hoses to be laid through the gearbox. This cannot be done with a conventional planetary gearbox due to the internal coaxial design. Ratios: i = n 1: n 2 = 5:1 to 15:1 (depending on gearbox size).
|
Our managers will contact you and clarify the terms of the order
|
1
2