Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT The Kripsol KAN 1020 K pump model is a single-stage pump with an electric drive and a horizontal shaft. Designed for pumping water in water treatment systems of swimming pools. In the circuit of pool attraction systems, it can also serve as a circulation pump. Suitable for seawater too. Maximum liquid temperature: 50 ° C. Maximum operating pressure: 2.5 bar (CAP), 3 bar (CAN). Degree of protection: IP55. Insulation class: F, 2850 rpm. Specifications: 400V/50 Hz/7.5 kW/10 Pk. Range: 20 l/min at 20 m - 120 l/min at 11 m.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol BL 760 - Kripsol Balear BL Side Valve Pool Filter Unit made of laminated polyester and KS-150 pump. Designed for circulation and mechanical filtration of pool water. So that the water in the pool is transparent and clean through the filter should pass 2.5 volumes of pool water per day, while do not forget about disinfection. Diameter: 760 mm, weight: 24 kg.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol BL 640 sand filters are made of glass reinforced polyester. Supplied with pressure gauge. There is a transparent cover on the upper part. They are used as a purification system for basins, (seawater) aquariums, ponds contaminated with industrial waters, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: 0.5 to 1.3 kg/cm. Diameter: 640 mm, weight: 23 kg.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS 100 self-suction centrifugal pump for Kripsol NK 33 basin is provided for water circulation. This pump model is made with a pre-filter and can be used together with a filtration tank for mechanical treatment of water in the pool. The pump can be installed above the water level. Continuous asynchronous bipolar pump motor with water protection class: IP55 and insulation class: F. Characteristics: 230 V/50 Hz/0,75 kW/1 Pk. Range: 83 l/min at 16.2 m - 358 l/min at 4 m.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol Brasil sand filters BLA20-2000 made of glass reinforced polyester. Supplied with pressure gauge. There is a transparent cover on the upper part. They are used as a purification system for basins, (seawater) aquariums, ponds contaminated with industrial waters, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: from 0.5 to 1.3 kg/cm. Capacity: 63 m3; Filtration: 5930 kg; Weight: 437 kg; Connection: 110 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol Brasil sand filters BLA34-1600 made of glass reinforced polyester. Supplied with pressure gauge. There is a transparent cover on the upper part. They are used as a purification system for basins, (seawater) aquariums, ponds contaminated with industrial waters, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: from 0.5 to 1.3 kg/cm. Capacity: 60-80 m3; Filtration: 3785 kg; Weight: 319 kg; Connection: 110 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT In Kripsol Brasil sand filters, BLA20-1050 are made of fiberglass reinforced polyester. Filters are located at the top of the dome (400 x 300 mm). The header is equipped with filtering elements, but can also be provided on request with a studded bottom. They are used as a purification system for basins, (seawater) aquariums, ponds, contaminated industrial water, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: from 0.5 to 1.3 kg/cm. Capacity: 17 m3; Filtration: 1065 kg; Weight: 164 kg; Connection: 63 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS EVO 75 self-suction pumps, specially designed for pumping pool water, are also very suitable for pumping water or chemically contaminated chlorine water. Range: Noryl reinforced fiberglass. Enclosures: reinforced fiberglass. Voltage 230 V with automatic thermal protection. Connection: NK 1¼ "internally; 2 "external thread, KS EVO 2" inside; 2 ¾ "external thread. Max. liquid temperature: 50 ° C. Degree of protection: IP55. Isolation class: F.
|
€ 557,62
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS 150 self-sucking pumps, specially designed for pumping pool water, they are also very suitable for pumping water or chemically contaminated chlorine water. Range: Noryl reinforced fiberglass. Enclosures: reinforced fiberglass. Voltage 230 V with automatic thermal protection. Connection: NK 1¼ "internally; 2 "external thread, KS EVO 2" inside; 2 ¾ "external thread. Max. liquid temperature: 50 ° C. Degree of protection: IP55. Insulation class: F. Characteristics: 230 V/50 Hz/1,1 kW/1.5 Pk. Range: 83 l/min at 18.5 m - 458 l/min at 4 m.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol BL 900 glass fiber reinforced polyester filters. Supplied with pressure gauge. There is a transparent cover on the upper part. They are used as a purification system for basins, (seawater) aquariums, ponds contaminated with industrial waters, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: 0.5 to 1.3 kg/cm. Diameter: 900 mm, weight: 45 kg.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT These Kripsol Brasil sand filters BLA45-1400 made of fiberglass reinforced polyester. Supplied with pressure gauge. There is a transparent cover on the upper part. They are used as a purification system for basins, (seawater) aquariums, ponds contaminated with industrial waters, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: from 0.5 to 1.3 kg/cm. Capacity: 61-77 m3; Filtration: 2910 kg; Weight: 256 kg; Connection: 110 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol GLO 506.71.B filter system with filter and pump with 1½ connection. Due to its unique design, the purge valve is redundant. Filtration systems are used as a purification system for pools, (seawater) aquariums, ponds, etc. Diameter: 500 mm; Weight: 100 kg; Throughput: 160 l/min.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol BL 520 Side Valve Pool Filter Unit made of laminated polyester and KS-150 pump. Designed for circulation and mechanical filtration of pool water. So that the water in the pool is transparent and clean through the filter should pass 2.5 volumes of pool water per day, while do not forget about disinfection. Diameter: 520 mm, weight: 17 kg.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS 100 T self-filling centrifugal pumps for swimming pools. The body is made of thermoplastic. Fiberglass corrugated impeller and stainless steel bushing AISI 303. Range: Noryl reinforced fiberglass. Enclosures: reinforced fiberglass. Voltage 230 V with automatic thermal protection. Connection: NK 1¼ "internally; 2 "external thread, KS EVO 2" inside; 2 ¾ "external thread. Max. liquid temperature: 50 ° C. Degree of protection: IP55. Insulation class: F. Characteristics: 230 V/50 Hz/0,75 kW/1 Pk. Range: 83 l/min at 16.2 m - 358 l/min at 4 m.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT In Kripsol Brasil sand filters, BLA30-1400 are made of fiberglass reinforced polyester. Filters are located at the top of the dome (400 x 300 mm). The header is equipped with filtering elements, but can also be provided on request with a studded bottom. They are used as a purification system for basins, (seawater) aquariums, ponds, contaminated industrial water, and for the treatment of recycled water in the horticulture industry. Maximum liquid temperature: 50 ° C. Particle size: 0.4-0.8 mm. Filtration rate: 50m³/h/m ². Operating pressure: from 0.5 to 1.3 kg/cm. Capacity: 46 m3; Filtration: 2910 kg; Weight: 251 kg; Connection: 90 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS 300 T centrifugal self-suction pumps designed for water circulation in basins. They can work in systems with a large volume of water at low pressure. This model is made of thermoplastic, an impeller made of plastic with the addition of glass fiber, a cover made of transparent polycarbonate, and a shaft made of stainless steel AISI 303. Specifications: 230 V/50 Hz/2,2 kW/3 Pk. Range: 83 L/min at 22 m - 608 L/min at 4 m.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Kripsol KS EVO 200 filter pump is one of the most profitable and high-quality units for swimming pools and spa centers. Most often used as a pumping pump, suitable for use in seawater. Single-stage type with horizontal shaft arrangement and electric drive. Equipped with a coarse cleaning filter.
|
€ 751,26
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS EVO 75 T filter pump is one of the most profitable and high-quality units for swimming pools and spa centers. Most often used as a pumping pump, suitable for use in seawater. Single-stage type with horizontal shaft arrangement and electric drive. Equipped with a coarse cleaning filter.
|
€ 557,64
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS EVO 50 T self-filling centrifugal pumps for swimming pools. The body is made of thermoplastic. Fiberglass corrugated impeller and stainless steel bushing AISI 303. Range: Noryl reinforced fiberglass. Enclosures: reinforced fiberglass. Voltage 230 V with automatic thermal protection. Connection: NK 1¼ "internally; 2 "external thread, KS EVO 2" inside; 2 ¾ "external thread. Max. liquid temperature: 50 ° C. Degree of protection: IP55. Isolation class: F.
|
€ 520,81
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Kripsol KS 50 self-suction pump designed to ensure continuous flow of water through the filter unit. It can effectively serve pools of up to 34,000 litres. Engine speed 2850 rpm. Range: Noryl reinforced fiberglass. Enclosures: reinforced fiberglass. Voltage 230 V with automatic thermal protection. Connection: NK 1¼ "internally; 2 "external thread, KS EVO 2" inside; 2 ¾ "external thread. Max. liquid temperature: 50 ° C. Degree of protection: IP55. Insulation class: F. Characteristics: 230 V/50 Hz/0,37 kW/0.5 Pk. Range: 83 L/min at 12 m - 242 L/min at 4 m.
|
Our managers will contact you and clarify the terms of the order
|