Catalog
-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
1-2 weeks delivery time Price incl. 19% VAT KIN Warmtepomp KHP 350 is an outdoor pool heat pump with which you can enjoy warm water, even in cold weather. The pump extracts energy from the room where it is located and converts it into heat. The water that passes through this unit is thus heated. This system will save costs compared to electric or fuel heaters. They have a body made of high-quality plastic, equipped with a pressure gauge. Adjustable with built-in thermostat and 24-hour timer. Specifications: 415 V/6.47 kW/18.1 A.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT KIN Warmtepomp KHP 250 thermal pumps for swimming pools and spa centers with which you can enjoy warm water, even in cold weather. The pump extracts energy from the room where it is located and converts it into heat. The water that passes through this unit is thus heated. This system will save costs compared to electric or fuel heaters. They have a body made of high-quality plastic, equipped with a pressure gauge. Adjustable with built-in thermostat and 24-hour timer. Specifications: 415 V/4.40 kW/12.5 A.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT KIN Warmtepomp KHP 150 heat pumps for outdoor pools with which you can enjoy warm water, even in cold weather. The pump extracts energy from the room where it is located and converts it into heat. The water that passes through this unit is thus heated. This system will save costs compared to electric or fuel heaters. They have a body made of high-quality plastic, equipped with a pressure gauge. Adjustable with built-in thermostat and 24-hour timer. Specifications: 230 V/3.01 kW/25.8 A.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT KIN Smartpress WG 3 HP water pressure control system. It monitors and permanently monitors the operation of the pump engine, as well as replaces conventional water pressure control systems. Fully resistant to corrosion, made of high quality polycarbonate (fiberglass reinforced polypropylene). Monitors the automatic start and stop of the water pump when the valve or valve is opened or closed. The Smart Press function functions as a dry stroke protection. Equipped with 3 LED lamps. Available in two versions: 1.5 HP and 3 HP. Power supply 220/ 240V. Frequency 50 Hz. Degree of protection IP 55. Max. water temperature. 45 ° C. Maximum pressure 15 bar.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The KIN SMART PRESS WG is a high quality device that takes over the control and monitoring of the pump motor and replaces conventional water pressure control systems. Fully resistant to corrosion, made of high quality polycarbonate (fiberglass reinforced polypropylene). Monitors the automatic start and stop of the water pump when the valve or valve is opened or closed. The Smart Press function functions as a dry stroke protection. Equipped with 3 LED lamps. Available in two versions: 1.5 HP and 3 HP. Power supply 220/ 240V. Frequency 50 Hz. Degree of protection IP 55. Max. water temperature. 45 ° C. Maximum pressure 15 bar.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT KIN Sirio Entry 230 is an electronic device that allows you to control the operation (start and stop) of single-phase electric pumps based on water consumption. This gives a constant pressure, regardless of the decrease in the frequency of the controlled engine speed. The pressure is displayed digitally. 230 V AC ± 10% - 50/60 Hz. Maximum engine phase current: 5.5 A (rms). Maximum allowable pressure: 800 kPa (8 bar). Maximum fluid temperature: 50 ° C. Protection standard: IP X5. Weight: 1.6 kg. Dimensions: 254 x 147 x 143 mm.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT KIN S3 - submersible pumps for the industrial sector, namely: cooling diamond tools, cutting tables, drilling machines. Joints: S1: 9 mm. S3: 11.5mm. Cable length: 2 m. Maximum liquid temperature: 35 ° C. Degree of protection: IP68. Max. immersion depth 3 m. Characteristics: 230 V/50 Hz/0,04 kW/0.07 Hp. Range: 10 l/min at 200 m - 30 l/min at 50 m. Dimensions: 130x85x113 mm.
|
€ 208,66
-
+
|
1-2 weeks delivery time Price incl. 19% VAT KIN S1 submersible pumps are designed for applications where cooling is required. Compact size and durable design. Field of application: cooling of diamond tools, cutting tables, drilling machines. Joints: S1: 9 mm. S3: 11.5mm. Cable length: 2 m. Maximum liquid temperature: 35 ° C. Degree of protection: IP68. Max. immersion depth 3 m. Characteristics: 230 V/50 Hz/0,04 kW/0.05 Hp. Range: 10 l/min per 90 m - 20 l/min per 10 m. Dimensions: 115x70x90 mm.
|
€ 174,45
-
+
|
1-2 weeks delivery time Price incl. 19% VAT KIN Roterende vatpomp 25-1200 barrel pump with pig iron pump housing and galvanized suction and discharge pipe for oil, gasoline, diesel fuel transfer. Performance: 80 manual spins = 25 litres.
|
€ 142,10
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The KIN Rain Master Favourite 240 SC pump station meets all the strict performance requirements of the European Standards. The frequency controller controls the output power of rainwater, depending on the actual demand. Up to 40% energy savings, up to 70% noise reduction in comparison with other analogues on the market. Extremely long-term operation: lower engine speeds, at which the system has significantly less wear and risk of rupture in the electronic components in the pump. With Bluetooth, the controller allows multiple RAIN MASTER Favorite stations to be used simultaneously.
|
€ 2.272,32
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Rain Master Favorite is a specially designed pumping station for the use of rainwater and its operation in domestic conditions. Automatic control of pump and switching according to DIN 1989/EN 1717. A great acquisition that will fit in spaces with limited space. Flow rate up to 100l/min. Low consumption (6 liters tank). Low noise level, built-in check valve. Low current consumption, wide application, comprehensive dry stroke protection, automatic operation mode.
|
€ 2.090,32
-
+
|
1-2 weeks delivery time Price incl. 19% VAT The RainControl level indicator gives a digital indication of the tank capacity on the LCD display. The level is measured using a brass pressure sensor, which is equipped with a 10-meter cable. The sensor can be easily placed in the tank, and can be connected directly to the case. 230 volts AC. Dimensions: 210 x 200 x 100 mm. Valve connection: 250 V/10A.
|
€ 469,41
-
+
|
1-2 weeks delivery time Price incl. 19% VAT KIN PWM 400 II D/7,5 - inverter for electric pumps maintains constant pressure to change the flow by adjusting the pump speed. Inside it is a flow sensor and a pressure sensor that allows it to react instantly, changing the operating conditions of the entire system, ensuring constant pressure under various conditions. The device combines comfort and economy, includes all the protection necessary for the pump.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT A unique system is the KIN PWM 400 II inverter D/13,3 for electric pumps maintains a constant pressure to change the flow by adjusting the pump speed. Inside it is a flow sensor and a pressure sensor that allows it to react instantly, changing the operating conditions of the entire system, ensuring constant pressure under various conditions. The device combines comfort and economy, includes all the protection necessary for the pump.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The KIN PWM 230 II 3-BASIC/4,7 inverter model for electric pumps maintains a constant pressure to change the flow by adjusting the pump speed. Inside it is a flow sensor and a pressure sensor that allows it to react instantly, changing the operating conditions of the entire system, ensuring constant pressure under various conditions. The device combines comfort and economy, includes all the protection necessary for the pump.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The inverter for the KIN PWM 230 II 1-BASIC/8,5 electric pumps maintains a constant pressure to change the flow by adjusting the pump speed. Inside it is a flow sensor and a pressure sensor that allows it to react instantly, changing the operating conditions of the entire system, ensuring constant pressure under various conditions. The device combines comfort and economy, includes all the protection necessary for the pump.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Five-liter expansion tank KIN PUMPS EXPANSIE KIT 5L complete with transverse brass adapter and pressure gauge. Easy to mount with mounting plate. Required for higher pressure pumps. With this kit, not only the service life of the main pump is extended, but also it is possible to save on electricity costs. Pressure: 8 bar. Volume: 5ltr. Maximum temperature: -10 - + 99ºC.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The KIN Pumpcontrol FSC15 pressure control system is a high quality switching device that takes control and monitoring of the pump motor. The device is completely resistant to corrosion, made of high-quality plastic (reinforced fiberglass). The sensor is equipped with a brass spring and a plexiglass viewing window. Power supply 220/ 240V. The maximum current is 6 amperes. Frequency 50/60Hz. Degree of protection IP 54. Max. water temperature. 60 ° C. Max. flow rate 10000 l/h.
|
€ 152,97
-
+
|
1-2 weeks delivery time Price incl. 19% VAT Submersible pump in impact-resistant plastic with a special impeller that cannot clog. Especially suitable for pumping water from basements. Complete with hose in hard box. With a cable of 10 meters. Maximum liquid temperature: 40 ° С. Maximum immersion depth: 4 m. Degree of protection: IP68. Diameter: 137 x 164 mm, height: 270 mm. Specifications: 230 V/50 Hz/0,25 kW/0.33 Hp. Range: 10 l/min at 6.3 m - 60 l/min at 3 m.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT KIN Open navulset 40 rainwater distribution system consisting of ball valve, solenoid valve, complete with replenishment aerator and funnel. The kit comes with a stainless steel bracket, suitable for wall mounting. Model with adapter, counterweight and float with 40 meters of cable.
|
€ 543,54
-
+
|