-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
Davits are specialized lifting and handling devices commonly used on boats and yachts. They are designed to securely hoist and support heavy loads, such as dinghies or life rafts, providing a convenient way to transport and store them on the vessel. Marine davits are essential equipment for ensuring easy access to smaller watercraft, enhancing safety during boarding, and maximizing deck space on boats and yachts.
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G711 is a hydraulic crane with a telescopic extension from Besenzoni, model G711. Characteristics: 212/304cm, lifting capacity up to 700 kg. The case is made entirely of stainless steel with fiberglass fairings, coated with a powder method, and after that the device is not afraid of UV. 180 °/270 ° rotation. Also, this model is equipped with a counterweight with rubber inserts for tensioning the cable, a control system and a manual pump in case of an emergency. Rotation range: 270 degrees, 180 degrees. Length (mm) - to choose from: 3000, 3500, 4000.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni hydraulic lift G509 with telescopic extension from Besenzoni, with parameters of 195/300 cm with a maximum thrust of 500 kg. The case is made of stainless steel and is covered with UV-resistant powder paint. Fairings are made of fiberglass. 180 °/270 ° rotation. Counterweight with rubber inserts for cable tension. Comes with a keypad. The device beeps each action. A manual pump is included, to prevent an emergency. Length of models to choose from: 3000 mm, 3500 mm, 4000 mm.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT A hydraulic telescopic crane G444 from Besenzoni, equipped with a hinge lever. This design is made entirely of stainless steel painted by the powder method. A selection of models is possible: 2530/3750mm for 430kg and 2150/3400mm for 500kg. The model is completely folded, and the boom is extended, thanks to the telescopic boom device. Counterweight with rubber inserts for cable tension. It is equipped with an electric control unit and a wired remote control. Manual pump in case of emergency.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G433 is a hydraulic crane with a double telescopic extension for wall mounting. Specifications: 1700/3800mm per 300kg Powder coated housing made entirely of stainless steel. Rotation up to 106 °. Complete with hydraulic power unit and push-button control panel with spiral cable. Manual pump in case of emergency. The ideal solution for your yacht, which will look aesthetically pleasing.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT The Besenzoni G432 is a telescopic electro-hydraulic lift on the 12/24V. Rotation with range: 180-270 degrees. Maximum lift by 1200 kg with a length of 4200 mm. It is made in steel structure with powder coating. The hydraulic power supply is hidden inside the fiberglass fairing. Waterproof portable wire control. Counterweight with rubber inserts for cable tension. The device sends a signal when the crane moves.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G428 telescopic hydraulic lift. Electric drive in 12/24V. Rotation range: 180-270 degrees. Lifting capacity of 1000 kg per 5350 mm of length. Powder coated steel structure. The hydraulic power supply is hidden inside the fiberglass fairing. Counterweight with rubber inserts for cable tension. Signal during crane movement.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Model telescopic lift Besenzoni G424S with electronic drive on the 12/24V. Rotation from 180 to 270 degrees. Lifting capacity in 1000 kg with a length of 4800 mm. Stainless steel powder coated structure. Counterweight with rubber inserts for cable tension. Automatic cable mounting system. Signal during crane movement
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G424 telescopic lift with remote control and 12/24V drive. Stainless steel powder coated structure. Rotation180 °/270 °. Counterweight with rubber inserts for cable tension. Manual attachment system for cable weight during cruise. The hydraulic power supply is hidden inside the fiberglass fairing. Load capacity of models: 400 kg, 600 kg.
|
Type:
|
1-2 weeks delivery time Price incl. 19% VAT The Besenzoni G423 is a telescopic type electrohydraulic hoist with a 12/24V drive. Rotation range: 180-270 degrees. Maximum lift of 800 kg at 4250 mm. Powder coated steel structure. The hydraulic power supply is hidden inside the fiberglass fairing. Waterproof portable wire control. Counterweight with rubber inserts for cable tension.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni electric-hydraulic telescopic lift G422 with a 12/24V drive and a turn from 180 to 270 degrees. Lifting capacity of 1000 kg at 4200 mm length. It is made in steel structure with powder coating. The hydraulic power supply is hidden inside the fiberglass fairing. Waterproof portable wire control. Counterweight with rubber inserts for cable tension.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Besenzoni telescopic lift G415 12/24V with a 180-270 degree turn and a lifting capacity of 800 kg with a length of 5500 mm with remote control and hydraulic drive. Powder coated steel structure. The hydraulic power supply is hidden inside the fiberglass fairing. Waterproof portable wire control. Counterweight with rubber inserts for cable tension. Signal during crane movement.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Besenzoni telescopic lift G409 with remote control and hydraulic drive on the 12/24V. Rotation180 °/270 °. Counterweight with rubber inserts for cable tension. Waterproof portable wire control. Manual pump for emergency use in case of disconnection of electronics. Signal during lift movement. Model length to choose from: 2650 mm, 3500 mm, 4000 mm.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G407 - telescopic lift with remote control and hydraulic drive 12/24V. Stainless steel powder coated structure. Rotation with range: 180 °/270 ° degrees. Counterweight with rubber inserts for cable tension. The hydraulic power supply is hidden inside the fiberglass fairing. Models with lifting capacity: 400 kg and 250 kg. Length: 2150 mm.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT The hydraulic boat G406 from Besenzoni with a double telescopic extension for installation on the side wall of 1600/2500 mm, lifting capacity of 250 kg. A stainless steel case with a powder coating that is not afraid of UV. Rotation by 90 ° - 110 °. Counterweight with rubber inserts for cable tension. The kit includes a wired remote control. The manual pump is also supplied for emergency situations. An audible signal accompanies each manipulation.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni wall-mounted telescopic revolver lift G404G with remote control and hydraulic 12/24V drive. 450 kg rise, 90 degree turn. Model for vertical face mounting. Stainless steel powder coated structure. Counterweight with rubber inserts for cable tension. Hydraulic power supply and water-resistant portable wire control. Manual pump for emergency control in case of power outage.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni electrohydraulic telescopic revolver lift G404 with remote control and drive operating in the 12/24V network. Rotation by 110 degrees. Stainless steel powder coated structure. Counterweight with rubber inserts for cable tension. Hydraulic power supply and water-resistant portable wire control. Manual pump for emergency control. Length of lift models, to choose from: 2650 mm, 3050 mm, 3250 mm.
|
Type:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G341 12/24V Fixed Lever Telescopic Hydraulic Lifter. The structure is made of steel with a powder coating, a cylindrical base with fiberglass fairings. 180 °/270 ° rotation. Counterweight with rubber inserts for cable tension. Keypad with spiral cable. Manual pump in case of emergency. The model can be selected: 400 kg by 2520 mm. Hydraulic crane with telescopic boom
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni G340 fixed lever hydraulic valve. A steel structure with a powder coating, a cylindrical base with fiberglass fairings. 180 °/270 ° rotation. Counterweight with rubber inserts for cable tension. Keypad with spiral cable. Manual pump in case of emergency. Model selection is 2870mm/400kg and 1775/2525mm/400kg.
|
Type:
|
1-2 weeks delivery time Price incl. 19% VAT Besenzoni collapsible telescopic crane G336 BIG MAGIC with remote control and hydraulic drive. Electro-hydraulic mechanism operating in 12/24 V. Hydraulic rotation, increase/decrease and partial expansion of the boom. Surface structure with coating from composite material. Rotation up to 130 °.
|
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The Besenzoni G331 is a hydraulic hoist with a telescopic and inclined boom, as well as an electronic 12/24V drive. Stainless steel powder coated structure. Rotation180 °/270 °. Counterweight with rubber inserts for cable tension. Waterproof portable wire control. Manual pump for emergency use. Model selection: 400 kg, 600 kg, 800 kg.
|
Type:
|
How are marine davits typically installed or mounted on vessels?
Marine davits are typically installed or mounted on vessels using strong and secure attachment points such as reinforced deck areas or transom brackets. The installation process involves ensuring proper alignment and reinforcement of the mounting points to handle the load-bearing capacity of the davits. This secure installation allows davits to safely and efficiently lift and lower tenders, dinghies, or other equipment on and off the boat.
What materials are commonly used in the construction of marine davits?
Marine davits are commonly constructed using materials like stainless steel, aluminum, or reinforced composites. These materials are chosen for their durability and resistance to corrosion in the harsh marine environment. Stainless steel is a popular choice due to its strength and resistance to rust, while aluminum offers a lightweight alternative without compromising on strength.
What maintenance practices help prolong the life of davits and ensure their proper functioning?
Proper maintenance of marine davits is crucial to ensure their longevity and functionality. Regularly inspecting and lubricating moving parts, such as winches and pulleys, helps prevent wear and corrosion. Additionally, rinsing them with freshwater after saltwater exposure and addressing any signs of damage promptly are essential practices for maintaining the integrity of davits on a boat.